User manual RYOBI G1155A SCHEMA ELECTRIC

[. . . ] 43 2 Contents Additional options . 59 General problems with the dishwasher . 72 Cleaning the drain pump and non-return valve . 82 3 IMPORTANT SAFETY INSTRUCTIONS WARNING ­ When using your dishwasher, follow basic precautions, including the following: Electrical Safety ~ Before installation, make sure that Read all instructions before installation or use of the dishwasher to prevent injury and machine damage. [. . . ] The program starts. 43 Additional options Delay start The starting time of a program can be delayed between 15 minutes and 24 hours. The start can be delayed in 15-minute-increments. When using the "Delay Start" function make sure that the detergent compartment is dry before adding detergent, use a cloth if necessary. The detergent might stick together and not get completely rinsed out. Do not use liquid detergent when selecting "Delay Start", the detergent could leak out of the compartment. , It is recommended to add the detergent and lock the dishwasher door to prevent children from coming in contact with the detergent. ^ Open the door. The display shows the current time of day and the last selected Start time, The program end time is also shown. The indicator , lights. }+ }Start time End at 12:00 13:32 12:00 OK } ^ Select the desired Start time with the +/- buttons. Holding the button will automatically increase or decrease the time. The end time will be automatically adjusted. ^ Confirm with OK. 44 Additional options The display changes to the program menu. The program starts automatically at the selected time. After confirming the minutes with OK, the display will revert to the previous menu. ^ Touch "Clear" to get back into the Settings J menu. 48 Settings ! Water hardness Your dishwasher is fitted with a water softener which you need to program to the water hardness level in your area, see "Before the first use". If the memory function is on, the program menu instead of the last selected program will be displayed (see "Settings - Memory"). If this is the case use the U button in the main menu. ^ Select Water hardness from the "Settings !" menu. The set water hardness is marked with a check (. ^ Select the water hardness of your local water supply, confirm with OK. °d 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37-45 46-60 61-70 gr/gal 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 25 26 27 28 29 30 31 32 33 34 35 36 37 38-46 47-62 63-73 Setting in display 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 45 60 70 49 Settings ! Rinse aid For best results the rinse aid dosage can be adjusted. The dosage can be set between 0 and 6 ml. The dosage set by default to 3 ml of rinse aid per program. ­ Use a higher setting if spots appear on dry glassware. ­ Use a lower setting if streaking appears on dishes or glasses. [. . . ] See "Frequently Asked Questions" for more information. ­ If the water pressure is higher than shown, a pressure reducing valve must be used. Ensure that the water connection is secure after the first use. , Installation, repairs and other work , Do not drink water from the dishwasher! ­ The dishwasher can heat its own water to the temperature required by the wash program. This allows for connection of the machine to either a hot (max. [. . . ]