User manual RYOBI G2360 SCHEMA ELECTRIC

[. . . ] 20 Preparing coffee/espresso using ground coffee . 27 Adjusting the strength of the coffee . 73 3 IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should always be followed, including the following: Read all instructions before installation or use of the coffee system. Proper use Please read these instructions carefully to prevent accidents and machine damage. This appliance complies with current safety requirements. [. . . ] When the coffee machine is operated in Eco Mode, the following will appear in the display while the machine is heating up: < HEATING-UP PHASE ECO MODE > To select the operating mode ^ In the main menu, press and hold the OK button for two seconds. < SETTINGS OPERATING MODE > ^ Turn the rotary selector until OPERATING MODE appears in the display. ^ Turn the rotary selector until ECO-MODE or COMFORT MODE (as desired) appears in the display. The setting is now saved. The coffee system is preset with Eco Mode. Eco Mode saves energy, the coffee system will switch to Standby mode if a drink has not been prepared for some time. The coffee system will heat up again when a button is pressed. The "Switch on at" and Switch off at" timer functions are not available in Eco Mode. In Comfort Mode the coffee system will remain heated and all functions are available. The amount of energy used in Comfort Mode is higher than that used in Eco Mode. 41 System lock The coffee system can be locked to prevent it from being used without your consent, e. g. by children. Temporarily deactivating the system lock ^ Press and hold the OK button for three seconds. Once the machine is turned off the system lock will be activated again and the coffee system will be locked again. Activating / Deactivating the system lock If the system lock is activated the "Switch on at" option will not work. The c timer symbol will not appear in the display. The setting is now saved. 45 Cleaning and care Rinsing the system manually The system will need to be rinsed manually if the machine has been used and the automatic rinsing is turned off. ^ Place a suitable container under the coffee dispensers. ^ In the main menu, press and hold the OK button for two seconds. < SETTINGS MAINTENANCE > ^ Turn the rotary selector until MAINTENANCE appears in the display. ^ Turn the rotary selector until RINSE THE SYSTEM appears in the display. ^ Turn the rotary selector until START appears in the display. The water from the rinsing process will flow from the coffee dispensers. 46 Cleaning and care Cappuccinatore The cappuccinatore can become clogged with milk residues, therefore it should be rinsed through if more than an hour has passed since it was last used to prepare milk. Regardless it should be taken apart and cleaned daily. Wash by hand using a mild solution of warm water and liquid dish soap. Rinsing the cappuccinatore ^ Place a container with some water next to the coffee system on the right hand side. ^ Turn the cappuccinatore dial to the J or z symbol. ^ Place a suitable container under the cappucinatore. [. . . ] If in doubt, consult a licensed electrician. The data plate can be found behind the drip tray inside the coffee system. The plug will fit in the outlet only one way. If it does not fit, DO NOT use force and DO NOT modify the plug in any way. [. . . ]