User manual RYOBI HP36KF

[. . . ] OPERATOR'S MANUAL SCREWDRIVER/FLASHLIGHT HP36KF 19 THANK YOU FOR BUYING A RYOBI SCREWDRIVER/FLASHLIGHT COMBINATION KIT. Your new screwdriver/flashlight combination has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, troublefree performance. CAUTION: Carefully read through this entire operator's manual before using your new screwdriver/flashlight combination. [. . . ] Following this rule will reduce the risk of electric shock. For best results, your cordless tool should be charged in a location where the temperature is more than 50°F but less than 100°F. Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury. WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: · lead from lead-based paints, · crystalline silica from bricks and cement and other masonry products, and · arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. CORDLESS TOOL RULES Cordless tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your cordless tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. WARNING: A damaged battery is subject to explosion. To avoid serious personal injury, properly dispose of a damaged battery. 4 SPECIFIC SAFETY RULES CHARGER SAFETY INSTRUCTIONS Save these instructions. This manual contains important safety and operating instructions for charger. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. Before using battery charger, read all instructions and cautionary markings in this manual, on battery charger, and product using battery charger. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. To reduce risk of injury, charge only nickelcadmium and nickel metal hydride type rechargeable batteries. Other types of batteries may burst causing personal injury and damage. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. Do not expose charger to wet or damp conditions. Following this rule will reduce the risk of electric shock, fire, or serious personal injury. Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons. [. . . ] Follow these directions when turning the flashlight on and off. To turn flashlight on: Depress the switch once. To turn flashlight off: Depress the switch again. 7 CHANGING SCREWDRIVER ROTATION See Figure 8. Follow these directions when changing the screwdriver rotation. To insert a screw: Depress the up arrow. [. . . ]