User manual RYOBI HTK2360MT

[. . . ] Disconnect the product from the power supply when it is not in use, before carrying out any adjustements, servicing or maintenance. Be familiar with the controls and proper use of the product. Remove all objects, such as rocks, broken glass, nails, wire or string that can lead to accidents. wear heavy , long trousers , boots and gloves. [. . . ] Make sure there are no cuts, cracks or signs of deterioration in the power cable. If any defects appear, have the power cord replaced by an Authorized Ryobi Service Centre. a nameplate on the product indicates the unit's voltage. Never connect the product to an AC voltage that differs from this voltage. If the power cord or extension cable becomes damaged during use, disconnect the cord from the supply immediately. Avoid bodily contact with earthed parts such as metal pipes, radiators, cooking ranges, refrigerators and the like. Electrical power should be supplied via a Residual Current Device (RCD) with a tripping current of not more than 30 mA. Do not use the product if parts have been damaged. check the product regularly to make sure that it will operate properly and perform the intended function. Any part that is damaged should be properly repaired or replaced by an Authorised Ryobi Service Centre. Never douse or squirt the product with water or any other liquid. Proper interpretation of these symbols will allow you to operate the tool more safely and effectively. Always wear safety goggles and safety glasses with side shields or a full face shield when operating this product. Do not expose to rain or use in damp locations. To reduce the risk of injury, user must read and understand operator's manual before using this product. Remove plug from the mains immediately if cable is damaged or cut. The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL DANGER MEANING Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, could result in serious injury. Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. (Without Safety Alert Symbol) Indicates a situation that may result in property damage. Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. [. . . ] Note: The sparking (flashing) resulting in the area of the vent slits / top of the main enclosure is normal and will not damage the tool. When you stop your equipment, be sure that the cutting system comes to complete stop before proceeding further. Note: This tool cannot be started if the lock switch (8) is pulled backward and/or the rotational handle (4) is being turned. Clean up the cutting area before starting. [. . . ]