User manual RYOBI IDCLE130

[. . . ] If the cover or bolts have been removed, replace them prior to use. Maintain all parts in good working order. Always secure tools when working in elevated positions. [. . . ] Never touch the blade, drill bit, grinding wheel or other moving parts during use. Never start a tool when its rotating component is in contact with the work piece. Never lay a tool down before its moving parts have come to a complete stop. ACCESSORIES : The use of accessories or attachments other than those recommended in this manual might present a hazard. An incorrectly mounted bit is extremely dangerous since it can fly off or break during drilling. Do not wear cloth gloves or a necktie since they could become caught in a rotating bit. If not held securely, accidents or injury may result. Pre-setting speed button (D) permits adjustments while running. For continuous operation, press the lock button (E) while squeezing the trigger. DRILLING IN WOOD To prevent ugly splits around the drill hole on the reverse side of the work piece, put a piece of scrap lumber under the work piece. When drilling in delicate materials such as wall tiles, it is essential to start with ordinary drilling and, once the tile is pierced, to continue with impact drilling. In deep bore holes the drill bit should be pulled out occasionally in order to remove the dust and chips from the hole. Stopper pole By using the stopper pole, holes of a fixed depth can be accurately bored. the depth of the hole will be the distance from the end of the bit to the end of the stopper pole. [. . . ] Stopper pole By using the stopper pole, holes of a fixed depth can be accurately bored. the depth of the hole will be the distance from the end of the bit to the end of the stopper pole. MAINTENANCE After use, check the tool to make sure that it is in top condition. [. . . ]