User manual RYOBI L175M

[. . . ] All exposed metal parts are isolated from the internal metal motor components with protective insulation. WARNING: The double insulated system protects you from electric shocks that may result from a problem in the tool's internal wiring. Nevertheless, you must observe all normal safety precautions to avoid electric shock. IMPORTANT: The maintenance of a double-insulated tool requires great care and a thorough knowledge of the system: it should only be carried out by a qualified technician. [. . . ] SECURE YOUR WORKPIECE PROPERLY before starting your tool. Whenever possible, use clamps or a vice to hold your workpiece. NEVER hold the workpiece in your hand or between your legs. Do not use your tool while standing on a ladder or any other unstable support. Always secure your tool and remain aware of what is underneath you when working in elevated positions. mAINTAIN THE TOOL IN GOOD WORKING CONDITION. For optimum safety and best results, keep your tool sharp and clean at all times. When not in use, during maintenance operations or when changing attachments (blades, bits, cutters, etc. Make sure the switch is in the "off" position or locked when you plug in your tool. If a tool part or accessory is damaged, check that it can continue to work and perform its function correctly before continuing to use the tool. Check the alignment of the moving parts and make sure they move freely. Check the assembly and anything else that might affect the operation of the tool. A guard or other part or accessory that is damaged must be properly repaired or replaced by a qualified technician to avoid risk of personal injury. Do not walk away from the tool until it comes to a complete stop. Keep the cable away from sources of heat, oil and sharp edges. Always keep track of the position of the cable and keep it well away from any moving parts. Always use a clean cloth to clean your tool. Never use brake fluid, petroleum-based products or solvents to clean your tool. Do not let familiarity (gained from frequent use of the tool) lead to carelessness. always remember that a moment of inattention is sufficient to inflict severe injury. Watch what you are doing and use common sense. Do not operate the tool when you are tired. [. . . ] After use, check the tool to make sure that it is in good working order. När motorn kommit upp till sitt maximala vridmoment och till sin högsta hastighet, börja hyvla med långsamma och regelbundna rörelser. Rindeaua Ryobi este echipat de guri de ieire a talaului la stânga sau le dreapta care pot fi selectate atunci când lucrai în condiii care o cer. All Ryobi products are guaranteed against manufacturing defects and defective parts for a period of twenty four (24) months from the date stated on the original invoice drawn up by the retailer and given to the end user. [. . . ]