User manual RYOBI OCS-1840

[. . . ] It is essential that you read the instructions in this manual before mounting and operating this machine. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. Read and understand the operators manual and observe the warnings and instruction labels affixed to the tool. cluttered and dark areas invite accidents. [. . . ] Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOLE NAME Wet Conditions Alert EXPLANATION Do not expose to rain or use in damp locations. To reduce the risk of injury, user must read and understand operators manual before using this product. Always wear safety goggles or safety glasses with side shields and, as necessary, a full face shield when operating this product. To reduce the risk of injury or damage, avoid contact with any hot surface. To indicate main switch or its positions, and all those cases where safety is involved. "OFF" is a stable position, whilst the "ON" position only remains during the time the button is depressed. To indicate that trigger can be moved in both the indicated directions of Lock ON & Lock OFF SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. for service we suggest you return the product to the nearest AUTHORIZED SERVICE CENTER for repair. When servicing, use only identical replacement parts. WARNING: To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operators manual. If you do not understand the warnings and instructions in the operators manual, do not use this product. Call Ryobi customer service for assistance. SAVE THESE INSTRUCTIONS MEASURING CAP The measuring cap (2) can be used to measure up to 118ml of liquid. The safe use of this product requires an understanding of the information on the product and in this operators manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. Trigger with lock-on Measuring cap Spray wand Tank Hose port Hose end Cap Handle ON/OFF button To release To lock-on Battery pack (Not included) Latch Nozzle Loosen for stream Tighten for fan spray Wire 9 ATTACHING the HOSE See Figure 2 To attach the hose: Insert the spray wand into the handle (8) until it stops. APPLICATIONS You may use this product for the purposes listed below: WARNING: Always follow the chemical manufacturers instructions printed on their product labeling for use, cleaning, and storage. Clean thoroughly after each use, following the instructions in the Maintenance section of this manual. Chemicals should be stored out of the reach of children. Failure to do so may result in serious personal injury. [. . . ] reattach the motor housing to the tank. Make sure to direct the spray toward an area that will not be damaged by the spray solution. Refill and repeat the procedure with clean water. It may be necessary to rinse the tank more than once, then drain again as directed above. [. . . ]