User manual RYOBI P220

[. . . ] OPERATOR'S MANUAL 1/2 in. , 18 VOLT 3-SPEED HAMMER DRILL P220 15 BATTERIES AND CHARGERS SOLD SEPARATELY Your hammer drill has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Thank you for buying a Ryobi product. SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS n Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 n General Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] It is designed for comfort and ease of grasp when operating in different positions and at different angles. ADJUSTABLE TORQUE CLUTCH The hammer drill is equipped with an adjustable torque clutch for driving different types of screws into different materials. DEPTH GAUGE ROD A depth gauge rod is installed on the auxiliary handle assembly to assist you in controlling the depth of drilled holes. 9 ASSEMBLY UNPACKING This product has been shipped completely assembled. n Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. WARNING: If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. PACKING LIST Hammer Drill with Auxiliary Handle Assembly Double Ended Bits (2) Lanyard (not included in Combo) Operator's Manual Warranty Registration Card WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts. OPERATION WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. CAUTION: To prevent damage to the battery pack, remove the battery pack from the charger immediately if no LED comes on. Return the battery pack and charger to your nearest service center for checking or replacing. Also, if you are removing the battery pack from the charger and no LEDs are on, return both the battery pack and the charger to your nearest service center. Do not insert another battery pack into the charger. A damaged charger may damage a battery pack. WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury. LED FUNCTIONS OF CHARGER LED WILL BE ON TO INDICATE STATUS OF CHARGER AND BATTERY PACK: n Red LED on = Fast charging mode. n Green LED on = Fully charged and in maintenance charge mode. n Green LED on = When battery pack is inserted into charger, indicates hot battery pack or that battery pack is out of normal temperature range. n Yellow and Green LEDs on = Deeply discharged or defective battery pack. n No LED on = Defective charger or battery pack. APPLICATIONS You may use this tool for the following purposes: n Hammer drilling in concrete, brick, or other masonry n Drilling in wood n Drilling in ceramics, plastics, fiberglass, and laminates n Drilling in both soft and hard metals n Driving screws with screwdriver bits, using driving accessories n Mixing paint 10 OPERATION CHARGING THE BATTERY PACK Battery packs for this tool have been shipped in a low charge condition to prevent possible problems. Therefore, you should charge it until the green LED on the front of the charger comes on. NOTE: Batteries will not reach full charge the first time they are charged. Allow several cycles (operation followed by recharging) for them to become fully charged. [. . . ] n Insert the hex key wrench into the chuck and tighten the chuck jaws securely. n Tap the hex key wrench sharply with a mallet in a clockwise direction. n Open the chuck jaws and remove the hex key wrench. NOTE: The chuck screw has left-handed threads. BATTERIES The battery pack for this tool is equipped with nickel-cadmium rechargeable batteries. [. . . ]