User manual RYOBI PD-2080VR

[. . . ] Then, tighten the chuck securely with the chuck key (2) provided. Insert the chuck key into each hole in turn and tighten by turning evenly in direction A. [. . . ] -1 in the high gear, and from 0 through 1, 250 min. -1 in the low gear , by controlling the triggersqueezing force. For continuous operation, press the lock button (5) while squeezing the trigger. An incorrectly mounted bit is extremely dangerous since it can fly off or break during drilling. Do not wear cloth gloves or a necktie since they could become caught in a rotating bit. If not held securely, accidents or injury may result. Never touch the chuck or metal body parts when drilling walls, floors, or other surfaces covering electrical wiring. While operating, the work piece must be securely held with the vise or the clamp etc. To change the rotation direction, stop the tool and push the forward button (12) or reverse button (11). When the forward button is pushed in, the bit rotates clockwise when viewed from the handle end of the tool. Chuck capacity Drilling capacity in wood in steel in masonry Frequency Voltage* Input No load speed high low Blows per minute high low Overall length Net weight PD-2070VR 13 mm (1/2") 40 mm (1-9/16") 13 mm (1/2") 20 mm (3/4") 50 Hz 110V, 230V 710 W 0 - 2, 700 min. The rotation speed can only be changed when the tool is at a standstill. [. . . ] To ensure safety and reliability, all repairs should be performed by an AUTHORIZED SERVICE CENTER or other QUALIFIED SERVICE ORGANIZATION. DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. [. . . ]