User manual RYOBI POWER KIT: 650W IMPACT DRILL EID650FK

[. . . ] c) Keep children and bystanders away while operating a power tool. Distractions can cause you to loose control. 2) Electrical Safety a) Power tool plugs must match the outlet. Do not use any adaptor plugs with earthed (grounded) power tools. [. . . ] Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventative safety measures reduce the risk of starting the power tool accidently. 1 GENERAL POWER TOOL SAFETY WARNINGS ¡ö ¡ö ¡ö d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Check for misalignment of binding or moving parts, breakage of parts and any other condition that may affect the power tools' operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. , in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. ¡ö Protect your lungs. Wear a face or dust mask if the operation is dusty. Use auxiliary handle, if supplied with the tool. Loss of control can cause personal injury. Wear hearing protection during extended periods of operation. If using an extension lead, ensure that the male and female plug connection is elevated and out of the way of any water contact. ¡ö OPERATION The bit can be removed by reversing the above procedure. SWITCHES (Fig. 3) APPLICATION stainless steel and pipe may also be drilled. [. . . ] WARNING: The chuck and exposed metal surfaces of the tool may become "live" if the tool drills into wiring in a wall. The operator must always ensure that the area being drilled does not conceal electrical wiring or plumbing. Do not make any adjustment while the motor is in motion. Always disconnect the electrical cord from the power source before changing the drill bit, brushes, or when working on the unit. After use, check your tool to keep it in top condition. [. . . ]