User manual RYOBI RBC30SES

[. . . ] It is essential that you read the instructions in this manual before mounting and operating this machine. Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely. [. . . ] Always make sure blade is installed correctly and securely fastened before each use. Failure to do so can cause serious injury. Use only the manufacturer's replacement TRI-ARC blade intended for use on this brushcutter. the TRI-ARC blade is suited for cutting pulpy weeds and vines only. Never use the TRI-ARC blade to cut woody brush. Exercise extreme caution when using the blade with this unit. Blade thrust is the reaction that may occur when the spinning blade contacts anything it cannot cut. This contact may cause the blade to stop for an instant, and suddenly "thrust" the unit away from the object that was hit. This reaction can be violent 14 RBC30SES Weight (kg) - Without fuel, cutting attachment and guard - Without fuel with string head - Without fuel with blade Fuel tank volume [cm3 or (L)] Cutting swath (mm) - String head - Blade Recommended torque for blade (Nm) Engine displacement (cm3 / cc) Line diameter for Reel EasyTM Head (mm) Line diameter for Pro Cut llTM Head (mm) Maximum engine performance (in accordance with ISO 8893) (kW) Maximum rotational frequency of the the spindle (min-1) Engine speed (rotational frequency) at recommended max. Spindle rotational frequency (min-1) Engine speed (rotational frequency) at idle (min-1) Fuel consumption (in accordance with ISO 8893) at max. Engine performance [kg/h or (L/h)] Specific fuel consumption (in accordance with ISO 8893) at max. H)] Vibration level idling (Trimmer) (m/s2) - Front handle / Left handle - Rear handle / Right handle Vibration level racing (Trimmer) (m/s2) - Front handle / Left handle - Rear handle / Right handle Vibration level idling (Brush Cutter) (m/s2) - Front handle / Left handle - Rear handle / Right handle Vibration level racing (Brush Cutter) (m/s2) - Front handle / Left handle - Rear handle / Right handle Sound pressure level at operator's ear (in accordance with EN 27917) dB (A) Sound power level (in accordance with ISO 10884) dB (A) 5. Read the operation manual and follow all warnings and safety instructions. Keep all bystanders, especially children and pets, at least 15 m from the operating area. Always handle fuel with care, it is highly flammable. Always refuel outdoors where there are no sparks and flames. Do not let petrol or lubricant come in contact with your skin. Keep petrol and lubricant away from the eyes. If petrol or lubricant comes in contact with the eyes, wash them immediately with clean water. WARNING If any parts are damaged or missing, do not operate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury. WARNING Do not attempt to modify this product or create accessories not recommended for use with this product. [. . . ] Engine requires approximately three minutes to warm up. Engine starts but will only run at high speed at half choke. Engine does not reach full speed and emits excessive smoke. Engine starts, runs, and accelerates but will not idle. [. . . ]