User manual RYOBI RHP1120 SCHEMA ELECTRIC

[. . . ] 37 IMPORTANT INSTALLATION SAFETY INSTRUCTIONS . 52 3 IMPORTANT SAFETY INSTRUCTIONS Children WARNING- When using your appliance follow basic precautions, including the following: Read all instructions before installation or use to prevent injury and appliance damage. This appliance conforms to all uniform safety codes and regulations. Keep these operating instructions in a safe place and pass them on to any future user. [. . . ] The timer can be used for two different functions: ­ To time kitchen activities ­ To set a burner to turn off automatically. You can select a time from 1 minute (01) to 9 hours (9^). A time up to 99 minutes is set and displayed in minutes. Example: With a time of more than 99 minutes, the timer must be turned to hours. The time is set in half-hour increments. The half hour is indicated by a dot after the number. Example (2 hours 30 minutes): h When the set time has elapsed, 00 will appear in the timer display and an audio signal will sound for a few seconds. 21 Timer Setting the timer Minutes Example: You want to set a time of 15 minutes. 00 appears in the timer display, and the right 0 will flash. Hours To set full hours, touch the respective number on the settings bar. To set the half hours, touch the space between 2 numbers on the settings bar. Example: 2 hours and 30 minutes ^ Turn the cooktop on. Starting with the shortest remaining time, which is shown in the display, all burners that are in use and the kitchen timer are selected in a clockwise direction. 25 Safety features Child safety lock / System lock Your appliance is equipped with a safety lock to prevent the cooktop and the burners from accidentally being turned on or any settings changed. The Child safety lock can be activated when the cooktop is turned on. When the safety lock is activated, the cooktop has only limited functions: ­ The burner power levels and the timer settings cannot be changed. ­ The burners, the cooktop and the timer can be turned off, but once off they cannot be turned on again. The system lock can be activated when the cooktop is turned off. When the system lock is activated, the cooktop cannot be turned on and the timer cannot be used. The appliance is programmed so that the system lock must be activated manually. The system lock can be programmed to be activated automatically 5 minutes after the cooktop has been turned off, providing the safety lock is not manually activated first (see "Programming"). If a locked control is touched when the safety lock or the system lock is activated, the indicator light comes on and the timer display shows LC for a few seconds. If there is an interruption to the power supply, the Child safety lock and the system lock will be deactivated. 26 To activate the locks ^ Touch the $ control until the respective indicator light comes on. The indicator light will go out after a short time. [. . . ] ^ Place the cooktop lightly on the spring clips. ^ With a hand on each side of the appliance press down evenly on the edges until it clicks into position. When doing so make sure that the appliance seal sits tightly on the countertop to ensure it is sealed correctly. This is important to ensure an effective seal. [. . . ]