User manual RYOBI RK23L-2 VUE GLOBALE

[. . . ] Installing the heating mat will increase energy consumption. This appliance is top-heavy and must be secured to prevent the possibility of tipping forward. Keep the doors closed until the appliance is completely installed and secured per the installation instructions. [. . . ] Keep the doors closed until the appliance is completely installed and secured per the installation instructions. To reduce the risk of injury or damage to the product, two people should be used for installation. With partition The minimum thickness of the partition is 5/8" (16 mm). If there is a partition with a thickness from 5/8" (16 mm) to 6 5/16" (160 mm) between the adjacent appliances, then each appliance should be individually installed within its own niche using the mounting accessories included. When finding the dimensions for the partition in model 4, note the thickness of the custom door panels and the door handles. This will prevent damage to the doors if they are opened at the same time. Required accessories and tools In this case, you will only need the heating mat from the "Merging Kit" to avoid condensation and prevent damages. Installing the heating mat will increase energy consumption. ^ Adhere the heating mat from top to bottom, and insert the lower pins into the holes j. 6 en ^ Loosen the screws on the rear side of the appliance p. ^ Hang the cable cover by its hinge on the heating mat and, from below, push into the screws q. ^ Push the appliances together as far as possible. Connect the appliances ^ Push the appliances together until the hinge halves interlock. ^ Once the appliances have been pushed together, insert the metal bracket t into the upper and lower plates. Use a tool to push the bracket in all the way. 7 en ^ Insert the cover strip into the seam between the appliances. [. . . ] ^ Once the appliances have been pushed together, insert the metal bracket t into the upper and lower plates. Use a tool to push the bracket in all the way. 7 en ^ Insert the cover strip into the seam between the appliances. [. . . ]