User manual RYOBI RK25 VUE GLOBALE

[. . . ] This appliance is top-heavy and must be secured to prevent the possibility of tipping forward. Keep the doors closed until the appliance is completely installed and secured per the installation instructions. To reduce the risk of injury or damage to the product, two people should be used for installation. [. . . ] To reduce the risk of injury or damage to the product, two people should be used for installation. If the appliances are installed directly next to each other (without a partition), they need to be attached together. Installing the heating mat will increase energy consumption. With partition The minimum thickness of the partition is 5/8" (16 mm). If there is a partition with a thickness from 5/8" (16 mm) to 6 5/16" (160 mm) between the adjacent appliances, then each appliance should be individually installed within its own niche using the mounting accessories included. When finding the dimensions for the partition in model 4, note the thickness of the custom door panels and the door handles. This will prevent damage to the doors if they are opened at the same time. ^ Hang the cable cover by its hinge on the heating mat and, from below, push into the screws k. ^ Loosen the screws from the connection box e. 6 en Connect the appliances ^ Push the appliances together until the hinge halves interlock. ^ Once the appliances have been pushed together, insert the metal bracket into the upper and lower plates. Use a tool to push the bracket in all the way. Now attach the appliance combination to the installation niche. For instructions, refer to the installation instructions for each appliance. [. . . ] Use a tool to push the bracket in all the way. Now attach the appliance combination to the installation niche. For instructions, refer to the installation instructions for each appliance. [. . . ]