User manual RYOBI RK48-1 VUE GLOBALE

[. . . ] If you are not sure of your home's voltage supply, consult a qualified electrician. Connecting the vacuum cleaner to a higher voltage may result in damage to the vacuum cleaner or injury. This appliance has a polarized plug (one blade is wider than the other. ) This plug will fit in a polarized outlet only one way. [. . . ] The Powerbrush can also be used on smooth floor surfaces. Do not use the powerbrush on: ­ (SEB 217-3/EB02 only) Floors with a variable or uneven surface. The brush could come into contact with the floor and cause damage. ­ High quality, hand knotted rugs, for example Berber or Persian rugs, as well as extremely long piled area rugs and carpets. There is a danger of the threads being pulled out. Turn the Powerbrush off to vacuum these types of floor coverings and use only suction. Connecting the Powerbrush to the Electro Telescopic wand ^ Insert a the Electro Telescopic wand into the Powerbrush until it clicks into place. ^ To release the parts, press the lock release button and pull the wand up and out b. For more information on use and care please refer to the instructions supplied with the Powerbrush. 11 Before using the vacuum cleaner Using the standard floor brush (depending on model) Observe the cleaning instructions of the floor manufacturer. The floor brush is suitable for cleaning carpets, rugs, carpeted stairs and hard surfaces that are not susceptible to scratching. 14 Use Adjusting the Electro Telescopic suction wand One part of the electro telescopic wand is fitted inside the other and can be adjusted to your height for comfortable vacuum cleaning. ^ Press the telescopic wand release button to release the tubes and adjust to the desired height. 15 Use Turning the vacuum On/Off ^ Press the On/Off foot switch s. Adjusting the suction You can adjust the suction power to suit the type of flooring. By reducing the suction power the floor brush can be pushed easier. The symbols on the controls indicate the type of use the settings are suitable for. # curtains, lightweight fabrics $ upholstery, cushions % * ( ) thick pile carpets, rugs and runners energy saving, daily vacuuming with low noise level lightly soiled textured carpets textured hard flooring, and for intensive cleaning of carpets ^ Turn the suction power selector to the desired setting. , To prevent static electricity your hand must touch the metal inlay on the underside of the vacuum hand piece. Be certain to continuously touch this inlay when vacuuming fine dust, flour or sawdust as these materials are more likely to create a static discharge. To further prevent static discharge while vacuuming, pull the vacuum along by the hose with one hand while continuing to hold the hand piece in the other hand. 16 Use Turning the Powerbrush On/Off The Powerbrush is turned on and off separately from the vacuum using the hand piece. [. . . ] Clean or replace them when necessary according to these Operating Instructions. If moisture gets into the appliance there is the risk of an electric shock. 25 Frequently asked questions , Turn off and unplug the vacuum cleaner before performing any maintenance work. What if the vacuum turns off automatically? [. . . ]