User manual RYOBI RLS5A

[. . . ] When not in use, before servicing, or when changing attachments, blades, bits, cutters, all tools should be disconnected from power source. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. [. . . ] Electrical power should be supplied via a residual current device (rcD) with a tripping current of not more than 30 ma. Keep all bystanders especially children and pets, at least 15 m from the operating area. Only one person is permitted to operate the log splitter. Before use, examine the power cord or extension cable for damage. If there are signs of damage, it must be replaced by a qualified service technician. Before use, check that there are no damaged parts. A defective switch or any part that is damaged should be properly repaired or replaced by an authorized service facility. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged must be properly repaired or replaced by an authorized service center to avoid risk of personal injury. IntEnDED uSE You may use this product for splitting logs and freeing jammed logs. envIronMEntal protEctIon Recycle raw materials instead of disposing of as waste. The machine, accessories and packaging should be sorted for environmentalfriendly recycling. 1 Safety SyMBol Operation Wet conditions alert Please read the instructions carefully before starting the machine. [. . . ] Our maximum liability shall not exceed the actual purchase price paid by you for the product. This warranty is valid only in the european union, australia and new zealand. Outside these areas, please contact your authorized ryobi dealer to determine if another warranty applies. [. . . ]