User manual RYOBI RPW130HS

[. . . ] RPW120HS/RPW130HS HydroSurgeTM Electric Pressure Washer OPERATOR'S MANUAL WARNING! To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Thank you for your purchase. RPW120HS manual. indd A1 09-9-16 11:23 ENGLISH(Original Instructions) INTENDED USE The cleaner is intended only for the cleaning of vehicles, boats, buildings, etc, by the removal of stubborn dirt using clean water and chemical detergents. For domestic use only, not for professional use, and only for operation at temperatures above 0° C . WARNING: High pressure jets can be dangerous if subject to misuse. [. . . ] Depress the button on the handle assembly and insert into the holes on the pressure washer. Press down on the handle assembly until the button on the handle clicks into place. Lower both collars on the handle and rotate clockwise until secure. Push the two ends of the gun/lance together so that the holes inside each end are aligned. Lower the locking collar and rotate counter clockwise to tighten securely. ATTACHING THE HIGH PRESSURE AND LOW PRESSURE HOSES TO THE GUN See Figure 6. The low pressure hose is the clear tube with the 6 ASSEMBLY UNPACKING This product requires assembly. Carefully cut the box down the sides then remove the product and any accessories from the box. WARNING: This new product has been shipped in a partially assembled condition as described below. If in doubt, call Ryobi Customer Service for assistance. Operation of a product that may have been improperly preassembled could result in serious personal injury. Inspect the product carefully to make sure no breakage or damage occurred during shipping. Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. If any parts are damaged or missing, please call Ryobi Customer Service for assistance. RPW120HS manual. indd Sec2:6 09-9-16 11:23 ENGLISH(Original Instructions) plastic fitting and goes on the spout at the bottom of the gun. Grasp the plastic fitting and slide onto the spout until it clicks into place. To remove, depress the latch on top of the fitting and remove the hose from the spout. The high pressure hose has a metal connection and slides into the opening at the top of the gun. Grasp the hose lock and pull outward to clear the way for the high pressure hose to be inserted. Insert the high pressure hose all the way into the hole. Push the hose lock fully back into the handle to hold the high pressure hose in place. CONNECTING THE GARDEN HOSE TO THE PRESSURE WASHER See Figure 7. The water supply must come from a water main. [. . . ] Please see your local dealer for list of authorised service centres in your area. This warranty does not cover belts, brushes, bags, bulbs or any part which ordinary wear and tear results in required replacement during warranty period. This warranty does not cover transportation cost or consumable items such as fuses and batteries. This limited warranty is void if the product's original identification (trade mark, serial number, etc. ) markings have been defaced, altered or removed or if product is not purchased from an authorised reseller or if product is sold AS IS and / or WITH ALL FAULTS. [. . . ]