User manual RYOBI RYAN-262

[. . . ] Keep the cord away from heat, oil and sharp edges. Use clamps or a vice to hold the work, it is safer than using your hand and it frees both hands to operate the tool. Keep cutting tools sharp and clean for better and safer performance. Keep handles dry, clean and free from oil and grease. [. . . ] Do not use the tool if the switch does not turn it on and off. WARNING The use of any accessory or attachment, other than those recommended in this instruction manual, may present a risk of personal injury. This electric tools in accordance with the relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts otherwise this may result in considerable danger to the user. Always wear safety goggles and a dust mask when sanding, especially sanding over-head. the machine is not suitable for wet sanding. Do not use sanding paper larger than needed. Extra paper extending beyound the sanding pad can also cause serious lacerations. The dust bag shall be equipped with the tool. And screw the adapter clockwise until the connection is credible. WARNING Do not throw sanding dust on an open fire because materials in fine particle form may be explosive. The weight of the unit supplies adequate pressure, so let the sandpaper and sander do the work. applying additional pressure only slows the motor , rapidly wears sandpaper and greatly reduces sander speed. Excessive pressure will overload the motor causing possible damage from motor overheating and can result in inferior work. Any finish or resin on wood may soften from the frictional heat. Do not allow sanding on one spot too long as the sander's rapid action may remove too much material, making the surface uneven. WARNING Do not wear loose clothing or jewelry when operating sander. They could get caught in moving parts causing serious injury. Keep head away from sander and sanding area. Hair could be drawn into sander causing serious injury. Sanding dust is drawn up through the holes of the sanding disc and collected in the dust bag during sanding. WARNING Failure to unplug the tool could result in accidental starting causing possible serious injury. [. . . ] Orbital motion is ideal for fast cutting action when removing old finishes, smoothing rough wood, cutting stock down to required dimensions, or for finishing surfaces to be painted. The sandpaper moves in tiny circles at a very high speed, allowing the sander to move easily. WARNING Collected sanding dust from sanding surface coatings such as polyurethanes, linseed oil, etc. Can self-ignite in your sander dust bag or elsewhere and cause fire. [. . . ]