User manual RYOBI S33K

[. . . ] Do not let visitors touch the tool or the extension cable when the tool is operating. ENSURE THAT THE WORKSHOP IS SAFE FOR CHILDREN by using padlocks and master switches or removing on/off keys. The tool will be more efficient and safer when used at the speed for which it was designed. Do not force the tool or attachment to do a job it was not designed for. [. . . ] Keep the cable away from sources of heat, oil and sharp edges. Always keep track of the position of the cable and keep it well away from any moving parts. Always use a clean cloth to clean your tool. Never use brake fluid, petroleum-based products or solvents to clean your tool. Do not let familiarity (gained from frequent use of the tool) lead to carelessness. always remember that a moment of inattention is sufficient to inflict severe injury. Watch what you are doing and use common sense. Do not operate the tool when you are tired. MAKE SURE THE WORK AREA IS WELL LIT so that you can clearly see what you are doing and that there are no hazards BEFORE you start using your tool. When not in use, the tool should be stored in a dry place which is high enough to be out of children's reach or under lock. nEVER TOUCH MOVING PARTS when the tool is operating. Never start a tool when one of its moving parts is in contact with the work place. ALWAYS PUT THE TOOL IN THE "OFF" POSITION before disconnecting it, to avoid accidental starting when you plug the tool back in. Refer to them frequently and use them to instruct others who may use this tool. If you lend this tool to someone, lend them these instructions as well. ALWAYS WEAR SAFETY GOGGLES AND A DUST MASK when sanding, especially sanding over-head. Extra sandpaper extending beyond the sanding pad can cause serious injury. Then slot in the connector by turning it clockwise until it is properly fitted. DO NOT THROW SANDING DUST ON AN OPEN FIRE because materials in fine particle form may be explosive. WEAR A SUITABLE RESPIRATOR when sanding lead-painted surfaces as well as certain woods and metals to avoid breathing the harmful/toxic dust or vapours. [. . . ] Never use any chemical products to clean the tool. All Ryobi products are guaranteed against manufacturing defects and defective parts for a period of twenty four (24) months from the date stated on the original invoice drawn up by the retailer and given to the end user. Deterioration caused by normal wear and tear, unauthorised or improper use or maintenance, or overload are excluded from this guarantee as are accessories such as battery packs, light bulbs, blades, fittings, bags, etc. In the event of malfunction during the warranty period, please take the NON-DISMANTLED product, along with the proof of purchase, to your retailer or nearest Authorised Ryobi Service Centre. [. . . ]