User manual RYOBI SG-1255

[. . . ] Never use the tool if its cover or any bolts are missing. If the cover or bolts have been removed, replace them prior to use. Maintain all parts in good working order. [. . . ] Stop immediately if there is considerable vibration or if other defects are detected. if this condition occurs , check the tool to determine the cause. Do not use separate reducing bushings or adapters to adapt large hole grinding wheels. Ensure that sparks resulting from use do not create a hazard e. Do not hit people, or ignite flammable substances. Always use protective safety glasses and ear protectors. Use other personal protective equipment such as gloves, apron and helmet when necessary. Never place the tool on the floor or other surfaces while it is running. grinding wheels continue to rotate after the tool is switched off. Never touch the wheel or place it on the floor or other surfaces while it is rotating. the flange and clamp nut must have the same outer diameter. Use the tool only for approved applications. Never use coolants or water or use the tool as a fixed tool. Grip the tool securely with both hands while operating. [. . . ] Deterioration caused by normal wear and tear, unauthorised or improper use or maintenance, or overload are excluded from this guarantee as are accessories such as battery packs, light bulbs, blades, fittings, bags, etc. In the event of malfunction during the warranty period, please take the NON-DISMANTLED product, along with the proof of purchase, to your retailer or nearest Authorised Ryobi Service Centre. This warranty in no way affects your legal rights concerning defective products. [. . . ]