User manual RYOBI SG1151 ACCESSOIRES

[. . . ] 9 Locating Controls and Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 About the Indicator Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Connecting a Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Using the Battery Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In the New password and Confirm new password fields, enter a new password. Click Change password. Customizing Your VAIO Computer > Setting the Password n 93 N To remove the Windows password 1 2 3 4 5 6 Click Start and Control Panel. Click User Accounts and Family Safety or User Accounts. In the Current password field, enter the current password that you want to remove. Click Remove password. Customizing Your VAIO Computer > Using Intel(R) VT n 94 N Using Intel(R) VT Intel(R) Virtualization Technology (VT) allows you to use hardware virtualization software for enhancing your computer's performance. !Intel VT may not be available depending on the CPU installed on your computer. For information on virtualization and how to use hardware virtualization software, contact the software publisher. To enable Intel VT 1 2 Turn on your computer. Press the F2 key when the VAIO logo appears. If the screen does not appear, restart the computer and press the F2 key several times when the VAIO logo appears. Press the < or , key to select Advanced. Press the M or m key to select Intel(R) Virtualization Technology or Intel(R) VT, press the Enter key, select Enabled, and press the Enter key. !If the Advanced tab is not displayed in the BIOS setup window or you cannot select Intel(R) Virtualization Technology, Intel VT is not available on the computer. 3 4 5 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key. Electrostatic discharge (ESD) can damage electronic components. Before touching a memory module, ensure the following: The procedures described in this document assume user familiarity with the general terminology associated with personal computers and with the safety practice and regulatory compliance requirements for using and modifying electronic equipment. Turn off your computer and disconnect it from its power sources (battery pack and AC adapter) and from any telecommunication links, networks, or modems before you remove any cover or panel from the computer. Failure to do so may result in personal injury or equipment damage. ESD can damage memory modules and other components. Install the memory module only at an ESD workstation. If such a station is not available, do not work in a carpeted area, and do not handle materials that produce or hold static electricity (cellophane wrappers, for example). Ground yourself by maintaining contact with an unpainted metal portion of the chassis while performing the procedure. Upgrading Your VAIO Computer > Adding and Removing Memory n 99 N Do not open the memory module package before you are ready to change the module. The package protects the module from ESD. Use the special bag supplied with the memory module or wrap the module in aluminum foil to protect it from ESD. Introducing any liquids, foreign substances, or objects into the memory module slots or other internal components of your computer will result in damage to the computer and any repair costs will not be covered by the warranty. [. . . ] Roxio Easy Media Creator is a trademark of Sonic Solutions. WinDVD for VAIO and WinDVD BD for VAIO are trademarks of InterVideo, Inc. ArcSoft and the ArcSoft logo are registered trademarks of ArcSoft, Inc. ArcSoft WebCam Companion is a trademark of ArcSoft, Inc. [. . . ]