Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual RYOBI SINGER-GTE2818. We hope that this RYOBI SINGER-GTE2818 user guide will be useful to you.
Lastmanuals help download the user guide RYOBI SINGER-GTE2818.
Detailed instructions for use are in the User's Guide.
[. . . ] Keep the cord away from heat, oil and sharp edges. Keep tools clean for better and safer performance. Keep handles dry, clean and free from oil and grease. Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it on. [. . . ] Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment breakage of parts, mounting and any other conditions that may affect its operation. have defective switches replaced by an authorized service facility. Do not use the tool if the switch cannot turn it on and off. Make sure that the tool is only connected to the voltage marked on the name plate. Never use the tool if its cover or any bolts are missing. If the cover or bolts have been removed, replace them prior to use. Maintain all parts in good working order. Always secure tools when working in elevated positions. Never touch the blade, drill bit, grinding wheel or other moving parts during use. Never start a tool when its rotating component is in contact with the work piece. Noise (sound pressure level) in the workplace can exceed 85 dB(A). In this case, sound insulation and hearing protection measure must be taken by the operator. The belt life will be increased by using the tracking adjustment. Turn the tool upside down and hold if firmly with one hand, then start the tool and observe the traking of the sanding belt. Stop the tool and adjust the tracking of the belt by rotating the tracking knob until the edge of the belt is even with the outer edges of both the front and rear rollers. CAUTION Check that the belt does not rub against the tool's frame. This tool is started and stopped by squeezing and releasing the trigger (8). For continous operation, press the lock-on button (7) while trigger is being squeezed. Squeeze trigger again to release the lock. Turn the switch on and permit the rotation of the abrasive belt to reach full speed. Then gently place the tool on the work piece surface. [. . . ] Never exert excessive pressure on the tool. the weight of the tool applies adequate pressure. Excessive pressure will retard the abrasive action, leave an uneven finish and cause extra wear to both the tool and the abrasive belt. Always lift the tool off the work piece before turning the switch off. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE RYOBI SINGER-GTE2818
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual RYOBI SINGER-GTE2818 will begin.
