User manual SABINE FBX SOLO SM-610

[. . . ] OPERATING GUIDE SL-610 SM-610 The Sabine FBX-SOLO models SM-610 and SL-610. CONGRATULATIONS!You now have the state-of-the-art in feedback control. The Sabine FBX-SOLO gives you automatic real-time feedback control for any channel on your mix, makes your system louder, and increases the clarity of your mains and monitors. It includes a user-selectable noise gate, especially useful in systems with a number of open microphones, such as courtrooms or conference rooms. [. . . ] If no lights flash on power-up, the noise gate is not engaged. When the SOLO's noise gate is enabled, it will not become engaged until after you've set all fixed filters and one dynamic filter (if the SOLO is configured for any). USING SABINE'S OPTIONAL SOLO ACCESSORIES 1-U rack tray (model #SL6RACK): An optional 1-U rack tray holds up to six SOLOs. Mount the SL-610s, SM-610s, or a combination of both side by side on the tray. Use only Sabine supplied screws; use of any other screws may damage the SOLO and void the warranty. 7 SL-610 Front & Back Panels ACTIVE/BYPASS Bypass mode takes the unit out of the signal path so that it will have no effect on the program. In Active mode, the unit controls feedback automatically. The two-color "BY" LED lights green when the unit is in Active mode and lights red when in Bypass mode. RESET Press until the LEDs stop flashing to reset or clear all filters. FILTER ACTIVITY When one of the unit's filters is activated, the corresponding LED lights. A blinking LED indicates the filter that was most recently activated. LOCK FIXED FILTERS When the "LOCK FIXED" button is pressed, its LED will light to indicate that the FBX is in "LOCK FIXED" mode. "LOCK FIXED" mode can be activated at any time after system setup and will stay on until the button is pressed again and the LED turns off. 12VDC ADAPTOR The FBX external power supply (single unit power supply; model #S-PSU1) is included with the unit. Use of any other power supplies may cause permanent damage to the unit and WILL VOID THE WARRANTY. INPUTS & OUTPUTS The connector labeled IN/OUT serves as both the unit's input (tip) and output (ring) when used with a single TRS plug. When used with a Y-cord, use the IN/OUT as the input and the OUTPUT as the output. FILTER WIDTH SWITCH Switch to narrow 1/10-octave filters for music applications or to wider 1/5-octave filters for spoken word applications. The change takes effect only on power up. Selecting a new width has no effect unless you power down and then power up again. MEMORY: The FBX stores the positions and depths of the filters in nonvolatile internal memory when the unit is turned off or during a power failure. The unit will return all filters to their previous frequencies and depths when it is turned back on. BYPASS MODE: The SL-610 has a true power-off bypass. The signal is unaffected in bypass mode even if the unit is turned off. If the unit is in active mode, no signal will pass if the power is off. [. . . ] 13301Highway 441 Alachua, FL 32615 including therewith a complete, detailed description of the problem, together with a legible copy of the original PROOF OF PURCHASE and a complete return address. Upon Sabine's receipt of these items: If the defect is remedial under the limited warranties and the other terms and conditions expressed have been complied with, Sabine will provide the necessary warranty service to repair or replace the product and will return it, FREIGHT COLLECT, to you, the purchaser. Sabine's liability to the purchaser for damages from any cause whatsoever and regardless of the form of action, including negligence, is limited to the actual damages up to the greater of $500. 00 or an amount equal to the purchase price of the product that caused the damage or that is the subject of or is directly related to the cause of action. Such purchase price will be that in effect for the specific product when the cause of action arose. [. . . ]