User manual SAECO MILK ISLAND MKI001

[. . . ] Power supply Housing material Jug material Size (w x h x d) (mm) Weight Jug Jug capacity Safety devices Milk Island is directly powered by the coffee machine Thermoplastic Thermoplastic - Glass 215 x 156 x 95 0, 450 kg Removable 0. 8 litres of emulsified milk or water to be heated Electro-hydraulic steam dispensing interlock in the absence of the jug, both during operating as well as stand-by phases. Important technical note: Milk Island must be connected to a preset coffee machine using the special connector. Milk Island is not equipped with a connector suitable for being connected to a conventional plug. [. . . ] Maintenance and cleaning operations of the base can only be carried out when the machine is cold and disconnected from the power supply. Do not remove the cover from the emulsifying group. do not use sharp objects or harsh chemical products (solvents) for cleaning. Use a soft cloth (not dampened with water) to wipe the base. Do not dry the machine and/or its components using a microwave and/or conventional oven. Wash the emulsifying group with hot water. Replace the emulsifying group on the jug; pay attention that the cover is correctly inserted in the tube located inside the jug. For thorough cleaning, fill the clean jug with water and dispense steam. The jug and the emulsifying group's components can be sterilised with a 5% sodium hypochlorite solution. Their sterilisation is compulsory if they are not used for a long period of time. Warning: to disconnect Milk Island, position the coffee machine on its side. Before carrying out this operation, remove the water tank, drip tray and dregs drawer and empty the coffee bean hopper. Turn the coffee machine off and unplug the plug from the socket. After having emptied the containers, delicately turn the machine onto one side. 5 At this point, re-position the coffee machine in its correct position and put back all its components. Keeping the button pushed, remove the base from the coffee machine. 6 Turn the coffee machine on and follow the start-up procedure as described in the machine's operating instructions. Then wash and sterilise all Milk Island components and place them in a safe place for future installation; if available, we recommend using the original packaging. Cover components not installed correctly. The coffee machine is not ready to dispense steam. [. . . ] In case of failure, faults or a suspected fault after a fall, immediately unplug Milk Island from the machine (see uninstalling). Repairs must only be carried out by an Authorised Service Centre. All liability for damages caused by works not carried out in a professional manner, is declined. This product complies with EU Directive 2002/96/EC. [. . . ]