User manual SAECO NINA CAPPUCCINO

[. . . ] The coffee machine is ideal for brewing 1 or 2 cups of espresso coffee and it is provided with a swivel steam and hot water spout. The controls on the front side of the machine are labelled with easy-to-read symbols. Repairs carried out by anyone other than authorized service centres. Use of non-original spare parts and accessories. [. . . ] 1) - Insert the water tank making sure that it has properly been replaced in its former seat. Use only fresh, non-sparkling drinking water to fillthetank. hotwater , aswellasanyotherliquid , may damage the tank. Do not turn on the machine with empty water tank: make sure there is enough water in the tank. Before starting the machine after a long period of inactivity and after ejecting steam, the machine circuit needs to be primed. Wait until a steady jet of water flows out of the steam spout (Pannarello). Close the "hot water/steam" knob (4) by turning it clockwise. 8A) - Insert the adapter (12) into the pressurized portafilter (10), then insert the filter (11). 11) - Insert the portafilter into the brew unit from the bottom (6). 12) - turn the portafilter from left to right until it locks in place. 14) - Preheat the pressurized portafilter by switching the selection knob (17) to the " " position until some water spills out of it. This is to be done only for the first coffee brewing. When 50cc of water have flowed out, switch the selection knob (17) to the " " position in order to stop brewing. 16) - remove the portafilter from the machine by turning it from right to left and drain any water left. There is no need to change the filter to make one or two coffees, since the machine is equipped with a special filter (11). Remove any coffee residues from the rim of the filter. 11) - Insert the portafilter (10) into the brew unit from the bottom (6). 12) - turn the portafilter from left to right until it locks in place. Make sure that they are correctly placed under the coffee dispensing holes. When the desired quantity of coffee has been obtained, turn the selection knob (17) to the " " position in order to stop coffee brewing. Wait a few second after brewing has stopped, then remove the cups of coffee (Fig. 16) - remove the pressurized portafilter and empty the remaining coffee residues. [. . . ] While the machine is getting ready, prepare a special container with milk or use the milk container. After preparing the cappuccino, immerse the suction pipe into a container with fresh clean water and eject steam. the cappuccinatore is clean when clean water is dispensed. Clean the suction pipe externally with a damp cloth. [. . . ]