User manual SAECO ODEA GIRO PLUS FULL

[. . . ] Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons. [. . . ] Coffee is a natural product and its characteristics may change according to its origin, blend and roast. The Saeco coffee machine is equipped with a self-adjusting system that allows the use of all types of coffee beans available on the market (not including flavored or carmelized). The machine automatically adjusts itself in order to optimize the extraction of the coffee, ensuring perfect compression of the beans to obtain a creamy espresso coffee that is able to release all the aromas, regardless of the type of coffee used. The optimization process is a learning process that requires the brewing of a certain number of coffees to allow the machine to adjust the compactness of the ground coffee. Attention should be given to special blends, which require grinder adjustments in order to optimize the extraction of the coffee (see page 17). Coffee may be ground according to your own tastes. The adjustment must be performed using the small pin located inside the coffee bean hopper. This must be pressed and turned using the supplied grinder adjustment key only. Press and turn the pin one notch at a time and brew 2-3 cups of coffee; the variation in grind may only be noticed in this way. The coffee brewing cycle can be interrupted at any moment by pushing the button. To brew 2 cups, the machine dispenses half of the entered quantity and briefly interrupts dispensing in order to grind the second serving of coffee. Descaling should be performed every 3 months, or when indicated by the machine. The used solution should be disposed according to the manufacturer instructions and/or regulations in the country of use. Note: before starting a descaling cycle make sure that: 1 a container of adequate size is available; 2 the water filter (if inserted) has been removed. When the descaling light is flashing, a descaling cycle must be performed. Turn the knob until the position is reached. Turn the knob until it is in the rest position ( ). Empty the container with the used descaling solution. After 10 minutes, turn on the machine again. Repeat steps 3 - 7 until all the descaling solution in the tank has been dispensed. Rinse and fill the tank with fresh drinking water. Turn the knob until the position is reached to empty the water tank. [. . . ] Prime the circuit again by dispensing water from the spout. Clean the dispensing holes with a soft cloth. Correctly place the cover on the coffee bean hopper and press it firmly. Knob to adjust the quantity of coffee per cup is in wrong position. [. . . ]