User manual SAECO ODEA GO FULL

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SAECO ODEA GO FULL. We hope that this SAECO ODEA GO FULL user guide will be useful to you.

Lastmanuals help download the user guide SAECO ODEA GO FULL.


Mode d'emploi SAECO ODEA GO FULL
Download
Manual abstract: user guide SAECO ODEA GO FULL

Detailed instructions for use are in the User's Guide.

[. . . ] 5 Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance. 6 Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any way. Return appliance to the nearest authorized service centre for examination, repair or adjustment. [. . . ] Dispense the water in the tank using the hot water function (see page 13). Fill the tank again with fresh drinking water. The machine is ready for use. Espresso Italia PTY LTD www. espressoitalia. com. au Freecall 1300 660 976 CONTROL PANEL Alarm light to empty the coffee grounds drawer: · permanently on: signals the need to empty the grounds drawer; this operation must be performed with the machine turned on (steps 4 and 5, page 17). Coffee dose adjusting knob (see page 10). Coffee button: · slow flash:1 coffee has been selected (the button has been pushed once). · quick flash: 2 coffees have been selected (the button has been pushed twice). 9 Hot water button: · off: steam function is selected · on: hot water function is selected Ground coffee quantity button (Opti-dose) (see page 10). Alarm light: · permanently on (one or more events): signals the machine is out of coffee, that the water tank is empty, or the drip tray is full. · on and slowly flashing (one or more events): signals that the Brew Group is not inserted, the grounds drawer is not inserted, the cover of the coffee hopper is not closed, the service door is open. · on and quickly flashing: signals the need to prime the water circuit. Descaling light: · on and flashing: signals the need to perform a descaling cycle (see page 15). Machine ready light: · permanently on: signals that the machine is ready for use. · on and flashing: signals that the machine is warming up. If the and lights flash alternately, switch off the machine and turn it Espresso30 seconds. Do not use alcohol, solvents, benzene and/or abrasive objects to clean the machine. The water left in the tank for several days must be disposed of. Do not dry the machine and/or its components using a microwave and/or conventional oven. 17 1 2 3 Turn off the machine and unplug it. Remove the filter, if fitted, and wash the water tank. Remove the drip tray and wash it under running water. 4 5 6 Remove the coffee grounds drawer. Empty the coffee grounds and the residual liquids separately. Wash all containers. Remove and wash the steam spout. Wash all external components. 7 8 If the grounds drawer is emptied with the machine turned off, or when the alarm light to empty the drawer is not on (see page 9), the count of the coffee portions contained in the grounds drawer is not restarted. For this reason, the alarm light to empty drawer may illuminate Espresso itItalia PTY LTD even when is not full. Remove and wash the handgrip. Before filling the coffee bean hopper, clean it using a soft wet cloth. www. espressoitalia. com. au Freecall 1300 660 976 18 CLEANING AND MAINTENANCE CLEANING THE BREW GROUP The Brew Group must be cleaned at least once a week. Before removing the Brew Group, remove the coffee grounds drawer as shown in fig. Once you have washed and inserted the Brew Group, insert the grounds drawer and close the service door. 2 3 1 Press the "PUSH" button to remove the Brew Group. Wash the Brew Group with running water. Wash filters carefully. Make sure the Brew Group is in rest position; the two references must match. 4 5 6 Make sure the components are in the correct position. The hook shown must be in the correct position; to check its position, firmly press the "PUSH" button. [. . . ] Before manipulating the coffee grinder, turn off the machine's main switch and unplug the cable. POWER CONNECTION Only connect the coffee machine to a suitable power socket. The voltage must correspond to the indication on the machine's label. INSTALLATION - Choose a level surface. Allow a distance of 10 cm / 4" between walls and cooking hotplates. Do not keep the machine at temperatures below 0°C / 32°F ­ danger of freezing damage. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SAECO ODEA GO FULL

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SAECO ODEA GO FULL will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag