User manual SAECO TALEA GIRO FULL

[. . . ] Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment. [. . . ] To dispense more steam turn the knob to the ( ) position and then back to the position. Wait for the milk to be frothed. When the desired milk froth has been reached, turn the knob until it is in the rest position ( ). 7 8 6 Remove the carafe using the handle. Gently swirl the carafe and pour the milk into the cup. Position the cup with frothed milk under the dispensing head. Brew coffee into the cup. 18 BEVERAGE SETTINGS BEVERAGE PROGRAMMING MENU Every beverage may be programmed according to your individual tastes. 8:30 am 15/06/06 Once a beverage has been customized, the machine will use these saved settings when brewing that particular beverage. To modify the quantity of coffee, you must reset the customization. To program a beverage: 8:30 am 15/06/06 Hold down the desired beverage icon for two seconds 19 COFFEE SETTINGS In this phase you can: 1 2 coffee adjust the quantity of coffee to be ground (opti-dose) select the use of preground coffee save settings exit without saving 8:30 am 15/06/06 Enter the menu of the coffee to be customized (press the corresponding icon for two seconds). 3 coffee 4 After pressing "start!", the machine will perform a brewing cycle. coffee custom coffee dose start! standard coffee dose By pressing "start!" the machine will perform a brewing cycle. The machine will automatically start and finish a brewing cycle according to the standard settings. To brew a different amount of coffee than the one preset by the manufacturer, press "custom coffee dose" before the end of the brewing cycle in progress. When the desired quantity is reached, press " ". The brewing cycle may be interrupted only by pressing " ". If the "stop coffee" icon is not pressed the coffee may overflow. 5 coffee custom coffee dose 6 coffee Possible options are as follows: Press Press Press to save the currently set quantity; to exit without saving; to go back to the programming menu. Once brewing is complete, you must press within five seconds to save this custom coffee dose setting. 20 PROGRAMMING THE MACHINE MACHINE SETTINGS Some of the machine's functions may be programmed according to your individual preferences. 8:30 am 15/06/06 Press "menu". The main programming menu will appear. 1. main menu beverage settings (see page 23) time/date settings (see page 24): - current date and time; - stand-by timer; - Switch on/off (stand-by) times over a day. Note: the day of the week is automatically set according to the set date. date format dd/mm/yy Set the date display mode. The machine also allows displaying the date in the American (mm/dd/yy) and in the (yy/mm/dd) format. stand-by settings after 1 hour This function allows you to set how much time will elapse (after the last coffee is brewed) before the machine enters stand-by mode. The default time value is «after 1 hour». When the set time has elapsed, the machine goes into stand-by mode. Press " " to exit the stand-by mode. After performing a self-test and a warming phase, the machine is once again ready for use. 25 This function allows the machine to be turned on and off (stand-by) at specific times. The machine performs this function only if it is switched on via the power button. machine on/off interval 1 on 00:00 off 00:00 interval 2 on 00:00 off 00:00 interval 3 on 00:00 off 00:00 To set the first switch-on interval To set the second switch-on interval To set the third switch-on interval Note: after having set the switch-on time, adjust the switch off time by pressing . To correctly set the energy-saving function, proceed as follows: - set the individual switch on/off intervals. - choose which days these intervals will be active. Make sure the switch-on intervals do not overlap. week day settings Scroll through the days of the week and, for each day, select the interval/s you wish to activate. Interval active for the selected day 1. 3. 4. 4. week day settings interval 1 on 07:30 off 09:00 interval 2 on 11:00 off 13:00 Monday Interval NOT active for the selected day The selected day of the week is displayed. interval 3 on 17:00 off 19:00 You can select various intervals for each day. Select the day of the week Note: the stand-by times set in the previous page are always valid. [. . . ] · Any repairs must be performed by an authorized customer service center. · Do not use the appliance with a defective power cord. The manufacturer or its customer service center will have to replace the power cable if damaged. Electrical Current!) · Turn off the appliance before opening the service door. [. . . ]