User manual SAECO TALEA TOUCH FULL

[. . . ] Intervallo 1 on 00:00 off 00:00 intervallo 3 on 00:00 off 00:00 Before using the machine, please read the attached operating instructions. Carefully read the safety rules When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 1 Read all instructions and information in this instruction book and any other literature included in this carton referring to this product before operating or using this appliance. 3 To protect against fire, electric shock and personal injury do not immerse cord, plugs or appliance in water or other liquid. 4 Close supervision is necessary when any appliance is used by or near children. [. . . ] If the key is not pressed the coffee may overflow the cup. If "save settings" is not pressed the machine returns to the main menu and the customized settings will not be saved. Once the dispensing is completed, of the saved settings, and the machine automatically returns to the main menu. Some of the machine's functions may be programmed to customize operations according to your own requirements. Product programming (see page 23) setting (see page 25): - current date and time; - stand-by timer; - Turn on/off times over a span of a day (energy saving). Previous page After having set each of the following menus, press - To return to the previous screen WITHOUT saving the new settings; to save; to return to the main menu WITHOUT saving the new settings. When the machine settings are selected the following screen appears. This function was described at the beginning of the manual. This setting is of fundamental importance for correctly adjusting the parameters of the machine according to the country where the machine is used. In this menu you can: This function activates/deactivates a tone every time the machine is ready. In this menu you can: This function activates/deactivates a tone every time a key is pressed. In this menu you can: Press "cup-warming surface" In this menu you can: Keep the cup-warming surface always on. Keep the cup-warming surface always off. Keep the cup-warming surface off when the machine is in stand-by mode To clean the internal circuits in order to guarantee that the beverages are only made with fresh water. the function is enabled as default by the manufacturer. Note: this rinse cycle is performed every time the machine is turned on after the warming phase. In this menu you can: The machine informs the user when the "Aqua Prima" water filter needs to be replaced. press "water settings" and "water filter". In this menu you can: This setting automatically adjusts the parameters which allow the user to perform a correct machine maintenance. With the "Water hardness" function you can adapt your machine to the hardness degree of the water you use. The tester may be used only for one measurement. It is recommended not to overlap intervals for turning on the machine. [. . . ] the appliance is dangerous to children. When left unattended, unplug from the electrical outlet. Keep the coffee machine packaging out of the reach of children. Never direct the jet of hot water and/or steam towards yourself or others. [. . . ]