User manual SAGEM AF8070

[. . . ] With the installation guide on the following pages, you can start using your machine quickly and easily. Detailed descriptions can be found in the following sections of this user manual. Follow all safety instructions in order to ensure proper operation of your machine. The manufacturer accepts no liability if these instructions are not followed. [. . . ] Do not make any repairs to the device yourself. improper maintenance can result in injuries or damage to the device. Only have your device repaired by an authorised service centre. Do not remove the type label from your device; this would void the warranty. Only use storage media that are compatible with the device. In order to prevent damage to the card or the unit, please turn off the power before removing or inserting the card. Never pull out the memory card while the device is accessing it. Using the keys on the upper side of the device, call up the following functions. 1 ON/OFF - After opening the leather case, switch the device on/off 2À--Select previous image 3T ­ Confirm selection /start, stop the slide show/ switch from thumbnails to full screen 4Á--Select next image 5Â--to switch to thumbnails On/Off switch Arrow keys left OK Arrow keys right Exit AF 8070 Tasten am Gerät 1SD/SDHC/MMC/MS--Slot for Memory card 2 ´- Socket--USB port for storage medium 3 - Socket ­ Port for power supply 4 Two-colour battery charge indicator light (LED): Red: The battery is charging Green: Charging completed 5 Fold out stand 3 Insert a memory card into the appropriate card slot on the right hand side of the device. Your photo frame supports the following memory cards: SD/SDHC/MS/ MMC. If one of the parts is missing or damaged, please contact your retailer or our customer service. Check whether the mains voltage of your device (indicated on the type label) matches the mains voltage available at the setup location. 1 Insert the small plug of the power supply unit into the port behind the flap on the right hand side of the device Insert the power supply unit into the socket. Only use storage media that are compatible with the device. In order to prevent damage to the card or the unit, please turn off the power before removing or inserting the card. Never pull out the memory card while the device is accessing it. After the start screen is displayed, an overview of the photos on the memory card appears. If a USB storage device is used at the same time as a storage card, the images are only displayed by the storage medium that was connected first. You can configure your digital photo album in such a way that by opening the flap of the leather case, the device is automatically switched on. a small magnet in the flap of the leather case activates a magnetic switch (Reed contact) in the device. As a result, the digital photo album can also be switched on/off only with the flap of the case. Each time you open the flap, the digital photo album is automatically switched on. [. . . ] AgfaPhoto shall not be liable for any damages or problems arising from the use of any options or any consumable materials other than those designated as original AgfaPhoto products or AgfaPhoto approved products. AgfaPhoto shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as AgfaPhoto products. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of AgfaPhoto. The information contained herein is designed only for use with this product. [. . . ]