User manual SAGEM AS1111

[. . . ] With the purchase of this device, you have chosen a quality AgfaPhoto product brand. Their device fulfils the most varied requirements for private use or in your office and business everyday. Scan photos or business cards and transfer the data automatically on to memory cards or onto compatible digital picture frames. In addition, you also use the scanner as a memory card reader in combination with a computer. [. . . ] 1 Open the protective cover and insert the document with the printed side facing up. 2 Lay the protective cover into the document feeder with the printed side facing upwards, the closed side of the page (black lines) forward and the page header in the direction of the # button. 3 Align the protective cover to the left hand edge. You also use the scanner as a memory card reader in combination with a computer. Notice Scanning documents with the protective cover Remove the document from the protective cover after the scanning process in order to avoid the document sticking to the protective cover. Notice Stand-by Mode If the scanner has not been used for approx. Your computer must meet the following minimum requirements: If lines appear on the scanned image or the image is not sharp, you need to clean the scanner glass. 2 Insert the cleaning pen into the left hand end of the document ejector. Notice Instructions for Cleaning The cleaning pen must be free of any dust. The device is Hot-Plug-and-Play capable which means you can link your computer to the device, whilst its running. You do not need to close down your computer to link the device to it. 1 Connect the device to your PC by means of the USB cable. 2 If the USB is working correctly , the device is recognised automatically. A drive letter is assigned to each memory card slot. Notice Connecting to an USB hub If you would like to connect the device to a USB hub = (USB distributor), ensure that the USB hub is connected to the computer before you connect the device to the USB hub. 3 You can access the memory card (drive) and edit the saved files. 3 Move the cleaning pen carefully two or three times to the other end of the document ejector. 4 Move the cleaning pen to the left hand side of the document ejector again and then remove the cleaning pen. Turn the device off using the on/off switch before you remove the plug from the socket. Never use liquid or easily flammable cleansers (sprays, abrasives, polishes, alcohol, etc. Do not allow any moisture to reach the interior of the device. Do not spray the device with any cleaning fluids. [. . . ] This user manual is a document that does not represent a contract. Product: The crossed-out waste bin stuck on the product means that the product belongs to the family of electrical and electronic equipment. In this respect, the European regulations ask you to dispose of it selectively; · At the collection points made available to you locally(drop-off centre, selective collection, etc. In this way you can participate in the re-use and upgrading of Electrical and Electronic Equipment Waste, which can have an effect on the environment and human health. [. . . ]