User manual SAGEM C120 ECO

[. . . ] USER GUIDE C120 Eco 1 DEAR CUSTOMER, Congratulations on buying your SAGEMCOM telephone and thank you for placing your confidence in us. This device has been manufactured with the utmost care. If you should have difficulties in operating it, we recommend that you consult this user manual. You can also find information on the following site : http://www. sagemcom. com To operate the device safely and easily, please read the section carefully “Recommendations and safety instructions”, page 4. [. . . ] The name and number will then be recorded in your phonebook. 18 DELETING NUMBERS FROM THE LIST OF CALLS • Select the number that you want to delete from the list of missed/received/sent calls. The number is deleted from the list of calls. . To delete all the contacts, select Delete all?. MAKING A CALL FROM THE LIST OF CALLS • Select the number that you want to call from the list of missed/ received/sent calls. • A message will invite you to call the selected number. The number is automatically dialled in hands-free mode. 19 TELEPHONE SETTINGS MODIFYING THE TELEPHONE LANGUE • Go to Phone setting / Set language. Using the the telephone’s language. or keys, select Setting the time format • Go to Phone setting / Set Date/Time / Time format. • The time format in use is displayed on the screen. Press keys or to modify it (12 hour / 24 hour clock). If you use the 12 hour clock, the icon AM or PM is displayed on the screen. MODIFYING THE DATE AND TIME Modifying the time • Go to Phone setting / Set Date/Time / Set time. • The current time and date are displayed on the screen. The setting to be modified (hour then minute) winks, press key or to set the required time; then press the key to confirm and go on to the next setting. Setting the date format • Go to Phone setting / Set Date/Time / Date format. • The time format in use is displayed on the screen. Press key or to modify it (MM/DD or DD/MM). ADJUSTING THE CONTRAST Do this if you cannot read the screen display. Modifying the date • Go to Phone setting / Set Date/Time / Setdate. • The current time and date are displayed on the screen. The setting to be modified (month then day) winks, press keyto set the required time; then press the key or to set the required time; then press the key go on to the next setting. to confirm and • Go to Phone setting / LCD Contraste. • Select the level of contrast you want using the keys • When the required level is obtained, press confirm. to or . 20 ADJUSTING THE VOLUME OF THE RING TONE • Go to Phone setting / Ring level. • Adjust the volume level (High / Medium / Low / Off) using keys or . Press , to confirm. MODIFYING THE FLASH DURATION (KEY «R») If you connect your telephone to a private automatic branch exchange, or if you have an enquiry call service (operator service), you may have to modify the duration of the flash, which is set to 250 milliseconds by default. If you have to modify the duration of flashing, proceed as follows : • Go to Phone setting / Set flash time. • Select your desired flash duration using keys or . [. . . ] Apart from all legal obligatory rules, SAGEMCOM, do not give any Guarantee, either implicit or explicit which is not set force in the present section, and can not be held responsible for any direct or indirect, material or immaterial damage, either in or out of the frame of the present guarantee. 30 If any provision of this guarantee shall be held to be in whole or in part invalid or illegal due to an obligatory rule applicable to consumers pursuant to their national legislation, such invalidity or illegality shall not impair or affect the remaining provisions or parts of this guarantee. This guarantee does not affect the Customer statutory rights. B) Exclusions From Guarantee SAGEMCOM shall have no liability under the guarantee in respect of: • Damage, defects, breakdown or malfunction due to one or more of the following: - Failure to properly follow the installation process and instructions for use - An external cause to the equipment (including but not limited to: lightening, fire, shock, vandalism, inappropriate conditions of electrical network or water damage of any nature) - Modifications made without the written approval of SAGEMCOM - Unsuitable operating conditions, particularly of temperature and humidity - Repair or maintenance of the equipment by persons not authorised by SAGEMCOM • Wear and tear from normal daily use of the equipment and its accessories • Damage due to insufficient or bad packaging of equipment when returned to SAGEMCOM • Usage of new versions of software without the previous approval of SAGEMCOM • Work on any equipment or software modified or added without the prior written consent of SAGEMCOM • Malfunctions not resulting from the Equipment or from software installed in user workstations for the purpose of use of the equipment. Communication problems related to an unsuitable environment including: - Problems related to access and/or connection to the Internet such as interruptions by access networks or malfunction of the line used by the subscriber or his correspondent - Transmission faults (for example poor geographical coverage by radio and TV transmitters, interference or poor line quality) - Local network faults (wiring, servers, workstations) or the failure of the transmission network (such as but not limited to interferences, fault or poor quality of the network) - Modification of the parameters of the cellular or broadcast network carried out after the sale of the Product 31 • Normal servicing (as defined in the user guide supplied with the equipment) as well as malfunctioning due to servicing not being carried out. [. . . ]