User manual SAGEM C90

[. . . ] The telephone is ready to receive a call. Setting up a 3-way conference (the 2 calls and yourself) You can make a 3-way conference call if the second call is made by your telephone (depending on your telephone company and the subscribed option) You are already in a double call and you want to set up a 3-way conference: Press button R + 3 : you can then talk with both the parties at the same time. In order to supply the guarantee, you should contact your dealer or Sagem Communications Helpdesk. the proof of purchase will be required. [. . . ] Communication problems related to an unsuitable environment including: - Problems related to access and/or connection to the Internet such as interruptions by access networks or malfunction of the line used by the subscriber or his correspondent - Transmission faults (for example poor geographical coverage by radio transmitters, interference or poor line quality) - The local network fault (wiring, servers, workstations) or the failure of the transmission network (such as but not limited to interferences, fault or poor quality of the network) - Modification of the parameters of the cellular network carried out after the sale of the Product · The normal servicing (as defined in the user guide supplied with the equipment) as well as malfunctioning due to servicing not being carried out. Servicing costs are in any event always borne by the customer. ⷠMalfunctions resulting from the usage of products, consumables or accessories not compatibles with the equipment. C) Out of Guarantee Repairs In the cases set forth in B) as well as after expiry of the guarantee period, the customer must ask the Authorized Sagem Repair Centre for a cost estimation. the repair and delivery costs will be invoiced to the customer. The foregoing shall apply unless otherwise agreed in writing with the customer and only for the United Kingdom. Making a call Pick up the handset from its base: you should hear the dial tone. Dial the number of your correspondent using the numerical keypad. At the end of the call, hang up the handset on its base. During a call you can switch to mute mode: the microphone of your telephone is turned off. ⷠTo switch to Mute mode: During a call, press and hold button party can no longer hear you. ⷠTo switch off Mute mode: release button again. Do not install your telephone in a damp environment, such as a bathroom, washroom, kitchen etc, and not within 1. 50 metres of a source of water or outside. This device is designed for use in temperatures of between 5 °C and 35 °C. do not attempt to remove screws or open the appliance. It does not contain any user-replaceable parts. the CE label confirms that the product complies with the 1999/5/EC regulations of the European Union Parliament regarding wireless systems and telecommunications for user protection and for preventing electromagnetic interference. [. . . ] Switching from one call to the other You are already in a double call and you want to switch from one call to the other: Press button R + call. 2 : the current call is placed on hold and you resume the second Make sure that there are no electrical wires hidden in the wall. Drill holes in the wall at the points you have marked. Leave about 5 to 7 mm between the wall and the underside of the screw heads. [. . . ]