User manual SAGEM D10T

[. . . ] Dépliant D10T. fm Page 1 Mercredi, 12. novembre 2003 12:26 12 Dear customer: Thank you for purchasing a DECT SAGEM telephone we appreciate your trust in us. This product was manufactured with the utmost care, should you encounter difficulties during its use. For your comfort and safety, we ask that you read the following paragraph carefully: Quick Guide to Handset Keys Base Station and Handset Overview MENU key DIRECTORY key Access to directory Memorization of the number REDIAL / CALLER ID LIST key Access to last five dialled numbers Access to Caller ID list Insert a dialling pause R key OK Quick Guide to Handset Display Symbols CHARGING STATUS symbol ( : full, 1. [. . . ] One dashes blink on the left of the display. Enter the directory location number and press , the phone number appears. Transferring a Phone Number from the Redialling Memory or Caller ID List 1. Select the redialling memory (press once, the symbol is displayed) or Caller ID list (press twice, the symbol blinks). Use to select the phone number you want to store in the directory. Select a memory slot with the (only free slots are displayed). Press to confirm. OK Incoming Call Storage The last 20 incoming calls are stored in the Caller ID list with the phone number and the date and time the phone number was transmitted (the date and time must have been set on the handset). If no phone number has been transmitted, four dashes are displayed in place of the phone number. The calls are registered regardless of whether or not they have been answered. New, unanswered calls symbol blinking are shown on the display by the in the standby state. The oldest entry is cleared when the memory is full. Opening the Caller ID List · Press and hold delete all the number. · Press to confirm. C OK 6. 4. Calling an Emergency Number · Press . The preset emergency number is displayed. Note: The call duration timer will not be displayed during an emergency call. OK 3. Receiving a Call When you receive a call. ---- and are shown on the handset display. If you have subscribed to the Caller ID service, the ---- is replaced with the caller's phone number. Taking a Call If the handset is on the base station: · Take it off the base station. If the auto-pickup function is enabled you can now answer the call directly (refer to § 7. 1. 3 "Activating/Deactivating the Auto-Pickup Mode"). Otherwise, press any key to answer the call. [. . . ] The prefix will be added automatically whenever the length of a dialled number is greater than this setting. · Press · Press to activate (1) or deactivate (0) the dialling prefix. To change or disable the additional prefix, repeat the same procedure. OK OK · Press OK to confirm. 7. 2. Setting Date and Time To set the date and time: · Press + 2 + 2. · · · · Enter the base station PIN (0000 by default). [. . . ]