User manual SAGEM F@ST 48 ETHERNET

[. . . ] SAGEM F@stTM 908/948 Ethernet/USB Combo ADSL Modem Reference Manual - Ethernet Interface Reference: 288 055 899 ed. 1 July 2004 Issue S SAGEM F@st TM 908 / 948 Reference Manual - Ethernet Interface E closely follows all technical changes and continually strives to improve its products for the benefit of its customers. It therefore reserves the right to change its documentation accordingly without notice. All the trademarks mentioned in this manual are registered by their respective owners: SAGEM F@stTM is a registered trademark of E, · · WindowsTM and Internet ExplorerTM are registered trademarks of Microsoft Corporation, Apple and MacOS are registered trademarks of Apple Computer Incorporation. [. . . ] Click the SW Upgrade button in the "BridgeMon" screen and the screen opposite appears. On Microsoft Windows XP, you can use the Windows XP PPPoE client instead. Please refer to § 3. 1. 1 and 3. 1. 2 for more details. On MacOS MacOS 8. 6 et 9 : The PPPoE client software utility is provided on the CD-ROM. Double-click on MacOS PPPoE icon, then follow the instructions. The PPPoE client software utility is integrated in the operating system. Please refer to sections 3. 1. 3 and 3. 1. 4 for the configuration. MacOS X : 18 SAGEM F@st TM 908 / 948 Reference Manual - Ethernet Interface 3. 1. 1 Configuring the PPPoE client in Windows XP You can skip this paragraph if you did the installation according to § 2. 1 ! 1 The installation procedure described below does not apply to any Microsoft operating systems other than Windows XP. In the Start menu, select Control panel, Network and Internet connections; the screen opposite appears. Click Network connections. 2 The connection screen appears. Click "Create a new connection" in the "Network tasks" area, or select File / New connection in the menu bar. 19 SAGEM F@st 3 TM 908 / 948 Reference Manual - Ethernet Interface When the following screen appears, select "Connect to the Internet". Then click Next. 4 The following screen appears. up my connection Then click Next. 5 The following screen appears. Select "Connect using a broadband connection that requires a user name and password ". Then click Next. 6 The next screen lets you name your connection. Enter a connection name (Internet ADSL, for example). Then click Next. 20 SAGEM F@st 7 TM 908 / 948 Reference Manual - Ethernet Interface The next screen lets you store the information on your Internet account. Enter your "User name", Enter your "Password" and confirm. Note: This data will be given to you by your IAP. Then click Next. 8 The final screen appears. Check the box if you want to create an Internet ADSL shortcut on your desktop. It is a good idea to create a shortcut on the desktop. Finally, click Finish. At this point, your Internet connection is created. You can now log on to the Internet. 21 SAGEM F@st TM 908 / 948 Reference Manual - Ethernet Interface 3. 1. 2 1 Internet reconnection in Windows XP If you checked the appropriate icon box, the will have been created on the desktop. [. . . ] LEDs Flag Status Corrective action ADSL off PWR on Yellow Modem detected by your computer. ADSL not synchronized Check the connection of your ADSL splitters. Each of your installation's telephone sockets should be fitted with an ADSL splitter. Check that the RJ11 type line lead supplied with your modem is connected to one of your sockets. [. . . ]