User manual SAGEM F@ST 840

[. . . ] SAGEM F@st TM 800 / 840 (PPP) User Guide 288 047 975 - 02 June 2005 Issue Sagem Communication closely follows all technological changes and is continually striving to improve its products for the benefit of its customers. It therefore reserves the right to change its documentation accordingly without notice. All the trade marks mentioned in this guide are registered by their respective owners: - SAGEM F@stTM is a registered trade mark of. Sagem Communication, - Windows TM and Internet Explorer TM are registered trade marks of Microsoft Corporation, - Apple and MacOS are registered trade marks of Apple Computer Incorporation. [. . . ] The "Connection" field should display: PPP. In the Settings area, the "Configuration" field should display: Using PPP server In the opposite case, to modify these greyed fields (disabled), proceed as follows: - Select Remote Access / TCP/IP in the menu bar ; a window appears and the menu bar is modified. - Select File / Configurations in the new menu bar ; a window appears. - Select "Default " in the scroll list, then click "Make Active". You can now select PPP in the drop-down list of the Connect via field and Using PPP Server from the list of the Configure field. Reproduction and communication prohibited without the written permission of Sagem Communication SAGEM F@stTM 800 / 840 (PPP) User Guide - 288 047 975-02 Page 4-7 4 - Installation in Mac OS 8. 6 or Mac OS 9. x 4. 3. 2 "Diagnostics" tools This application lets you monitor the status of the ADSL line and configure the TM SAGEM F@st 800 / 840 modem. This application is present on all Operation Systems listed at § 1. 2 - System requirements. 1 After having installed the modem and connected it to the Macintosh using its USB cable, the diagnostics icon appears on your desktop. Double-click the diagnostics tool icon, or Click the triangular icon in the control strip. 2 The diagnostics screen appears. In each of the tabbed screens, the bottom right corner has a square icon, the background color of which indicates the status of the modem (see table below). In each of the tabbed screens, toward the bottom center, there is a button. When you make the change, this button becomes "active". Click this button to register the changes; a window prompting you to restart appears. Click OK, then restart your computer. SAGEM F@stTM 800 / 840 (PPP) User Guide - 288 047 975-02 Page 4-8 Reproduction and communication prohibited without the written permission of Sagem Communication 4 - Installation in Mac OS 8. 6 or Mac OS 9. x 4. 3. 2. 1 "Operation" screen "ADSL status" area Field Modem status Black Modem is unplugged from USB The computer has not detected the presence of the modem on one of its dedicated USB ports ADSL link not synchronized. A connection to the Internet cannot be set up The computer has detected the presence of the modem on one of its dedicated USB ports and ADSL synchronization is in progress ADSL link synchronized. A connection to the Internet can be set up Description Red The modem is waiting for the driver to respond ADSL synchronization in progress Yellow Green The modem is operational Line type G. DMT G. LITE ANSI T1. 413 Click this button to reset the modem. Reproduction and communication prohibited without the written permission of Sagem Communication SAGEM F@stTM 800 / 840 (PPP) User Guide - 288 047 975-02 Page 4-9 4 - Installation in Mac OS 8. 6 or Mac OS 9. x "ADSL performance" area Field Line Rate Transmit Data Rate Line Rate Receive Data Rate User's instantaneous receive rate (in kbit/s) User's instantaneous transmit rate (in kbit/s) Downstream or incoming rate (data coming from the Internet) negotiated by the ADSL link (in kbit/s) Description Upstream or outgoing rate (data sent to the Internet) negotiated by the ADSL link (in kbit/s) SAGEM F@stTM 800 / 840 (PPP) User Guide - 288 047 975-02 Page 4-10 Reproduction and communication prohibited without the written permission of Sagem Communication 4 - Installation in Mac OS 8. 6 or Mac OS 9. x 4. 3. 2. 2 "Statistics" screen "ADSL" area Field Tx Rate FEC VID - CPE Rx Rate Margin VID - CO CRC Attenuation Description Indicates the upstream or outgoing rate (data sent to the Internet) negotiated by the ADSL link (in kbit/s) Indicates the number of FEC errors since the connection was set up Indicates the VID (identifier) of the ADSL equipment at the network operator end (ATU-C) Indicates the downstream or incoming rate (data coming from the Internet) negotiated by the ADSL link (in kbit/s) Indicates the current margin (in dB) Indicates the VID of the ADSL equipment at the subscriber end (ATU-R) Indicates the number of CRC errors since the start of transmission Indicates the current attenuation (in dB) This button updates all these counter statistics "ATM" area Field Cells Rx VPI Cells Tx VCI HEC Delineation Description Indicates the number of cells received since the connection was set up Indicates the VPI used in the ATM cell header Indicates the number of cells transmitted since the connection was set up Indicates the VCI used in the ATM cell header Indicates the number of HEC errors since the connection was set up Indicates the ATM Delineation status (good or bad) SAGEM F@stTM 800 / 840 (PPP) User Guide - 288 047 975-02 Page 4-11 Reproduction and communication prohibited without the written permission of Sagem Communication 4 - Installation in Mac OS 8. 6 or Mac OS 9. x "Packets" area Field Packets Rx Packets Tx Lost Description Indicates the number of AAL5 packets received since the connection was set up Indicates the number of AAL5 packets transmitted since the connection was set up Indicates the number of AAL5 lost since the connection was set up 4. 3. 2. 3 "Configuration" screen "Configuration" area Field ATM Channel VPI ATM Channel VCI Encapsulation Type Description Displays the value 8 by default. This field can be used to enter a VPI value between 0 and 255 Displays the value 35 by default. This field can be used to enter a VCI value between 0 and 65535 PPPoA LLC PPPoA VCMUX PPPoE LLC PPPoE VCMUX ADSL Standard ANSI TI. 413 G. DMT G. LITE Multi Standard (Default value) (Default value) SAGEM F@stTM 800 / 840 (PPP) User Guide - 288 047 975-02 Page 4-12 Reproduction and communication prohibited without the written permission of Sagem Communication 4 - Installation in Mac OS 8. 6 or Mac OS 9. x "Version information" area Version Information (Vx. y. z) Field Driver SAGEM Monitor Firmware Hardware Product version (V2. 2. 30, for example) Description Displays the modem driver version Displays the diagnostics application version Displays the version of the code in the modem Displays the chipset version Reproduction and communication prohibited without the written permission of Sagem Communication SAGEM F@stTM 800 / 840 (PPP) User Guide - 288 047 975-02 Page 4-13 4 - Installation in Mac OS 8. 6 or Mac OS 9. x 4. 4 Uninstalling the SAGEM F@stTM 800 / 840 1 Insert the CD-ROM in the appropriate drive on your computer ; an icon appears in the desktop. Double-click this icon to show the content of the CD-ROM. 2 3 Double-click on the OS 8. 6 - 9. x icon to run the Install / Uninstall program. At top left, select Uninstall from the list , and then at bottom right click . 4 The following screen appears. Click . 5 When the software has been uninstalled, you are prompted to restart your computer. Click . 6 Uninstallation was successful. [. . . ] The SAGEM F@stTM 800 / 840 must not be exposed to strong sunlight or to a strong heat source. The SAGEM F@stTM 800 / 840 must not be placed in an environment subject to significant steam condensation. The SAGEM F@stTM 800 / 840 must not be exposed to water splashes. The SAGEM F@stTM 800 / 840 must not be covered. Maintenance Do not open the casing. [. . . ]