User manual SAGEM F@ST 940

[. . . ] SAGEM F@stTM 900 / 940 ADSL Ethernet Modem User Guide Reference : 251 302 301 ed. 6 November 2003 Issue S SAGEM F@st TM 900 / 940 User Guide E closely follows all technical changes and is continually strive to improve its products for the benefit of its customers. It therefore reserves the right to change its documentation accordingly without notice. All the trademarks mentioned in this guide are registered by their respective owners: · · · SAGEM F@stTM is a registered trademark of E, WindowsTM and Internet ExplorerTM are registered trademarks of Microsoft Corporation, Apple and MacOS are registered trademarks of Apple Computer Incorporation. [. . . ] Enter your user name, Enter your password and confirm. Note: This data will be given to you by your IAP. Then click Next. 7 8 The final screen appears. Check the box if you want to create an ADSL Internet shortcut on your desktop. It is recommended to create a shortcut on the desktop. At this point, your Internet connection is created. You can now log on to the Internet. 19 SAGEM F@st TM 900 / 940 User Guide 4. 1. 2 1 Internet connection in Windows XP If you checked the appropriate box, the icon will have been created on the desktop. Double-click this icon ; the following screen appears 2 3 4 Then click . Open your browser. When the connection is set up, a triangular icon appears bottom right in the task bar. 20 SAGEM F@st TM 900 / 940 User Guide 4. 1. 3 1 Configuring the PPPoE client in MacOS X (apple) menu in the Click the menu bar, select System Preferences, then click the Network icon. The Location: field should contain Automatic. The Show: field should contain Built-in Ethernet. 2 3 4 5 Select the PPPoE tag and the relevant panel appears. Check the Connect using PPPoE box to force connection in PPPoE mode and enable you to complete the grayed out fields. Complete the Account Name field with your user name. Complete the Password field with your password. Note: This "Account Name" and "Password" information will be provided to your by your Internet Access Provider (IAP). It is advisable to check the Show PPPoE status in menu bar box. Click Apply now to register your input. 6 7 21 SAGEM F@st TM 900 / 940 User Guide 4. 1. 4 Internet connection in MacOS X 1 In the desktop, double-click the icon representing your Mac OS X hard disk. Open the Applications folder and then double-click the connection icon. The screen opposite appears. 2 Check that the information contained in the Configuration, Name and Password fields is correct. You can now surf the Internet. 3 4. 1. 5 PPPoE client software not supplied with the operating system You may find it on a separate installation CD-ROM. You may also find it on an installation CD-ROM taken from your IAP's kit. This client software may appear in the list below: ! · · · · · Friendly PPPoE MacPoet RasPPPoE Tango Access WinPoet Contact your IAP for more information. Some software is available as Freeware on the Internet. 22 SAGEM F@st TM 900 / 940 User Guide 4. 2 DHCP connection mode To connect your computer (PC or Mac) operating in DHCP client mode via its Ethernet interface to the SAGEM F@stTM 900 / 940, you must correctly configure the computer. [. . . ] Remark : When the firewall is activated, the box of Internet Connection Firewall field is checked and the Settings button is active. Click on the Settings button. 4 The screen opposite appears. Click on the Add button. 32 SAGEM F@st TM 900 / 940 User Guide 5 The screen opposite appears. Enter 3456 in the fields External Port number and Internal Port number allocated to the BridgeMon application and select UDP protocol for transport layer. [. . . ]