User manual SAGEM ITD 58NG UK

[. . . ] LU 252968202A ITD_58N-59N NANO V5_EN assemblé. fm Page 1 Mercredi, 20. juin 2007 2:46 14 QUICK START CONGRATULATIONS! QUICK START Connection diagram ITD 60N and TV without scart DIGITAL TERRESTRIAL TV RECEIVER ITD 58N/59N/60N ITD 61/62/63/64/65 ITD 68N*/71*/72*/73*/74*/75* *Top Up TV compatible This new generation of Set Top Box gives you access to new digital services and makes it easy for you and your family to choose the very best experiences of Digital TV. Once you have connected your Set Top Box and adjusted it according to your preference, you can enjoy all the services. You can update your Set Top Box through the antenna stream as new functions and services become available. [. . . ] You can memorize or not. 4-4 AERIAL FAILURE If the channel search has found no channel, this screen is displayed to help you adjust the aerial. Enter a channel number (refer to http//www. dtg. org. uk/retailer/tx_details/_tx_index. htm. For example, Oxford channel numbers are 29, 34, 48, 51, 52, 68. These numbers depend on broadcasters and are subject to change. ) and move the antenna until the signal and quality bars are green. When signal and quality are green, press BACK to launch a new channel search. (*)Not available on ITD58N/59N/60N (**) Not available on ITD58N 5-2 PRELIMINARY/ INSTALLATION CODE Your Set Top Box is supplied ready to use for a standard configuration. TV : 4/3 format, RGB (Letterbox) VCR : PAL (none on ITD 58N/59N/60N) Access to the installation screens shown below will enable you to adapt your Set Top Box to your favourite equipment. The access to main menu is obtained by pressing the MENU key. You can memorise your selections by pressing the key. Return to the previous screen by pressing the BACK key. Exit from all the screens by pressing the EXIT key. Access to the installation menus is protected by a secret installation code to avoid any unintentional misadjustment. Your Set Top Box is supplied with default code 1234. Note: you will not be prompted to enter any code, if the installation code is «0000». 5-3 CHANNEL SEARCH: AUTO TUNE Press menu key and select icon, then select CHANNEL TUNING. This installation will complete list "All services" with all the channels found during the scanning of all the frequencies. This list is a summary of all the channels and will not be modified. It will be possible to create personal lists based on this reference list, also called list "All services" (see page 15). It would be advisable to launch a channel search monthly in order to keep your Set Top Box up todate. Press to start channel tuning. Note: You may observe a difference between the number of channel found and the number of channel present in the channel list. This may happen when you are in area where you receive same channel from different transmitters. 5-4 AUDIO/VIDEO INSTALLATION Press menu key and select icon, then select video and sound settings. Use cursor to move down to the VIDEO AND SOUND SETTINGS icon and press to confirm. -6- -7- -8- -9- (not supplied in ITD 61/62/71/73) LU 252968202A ITD_58N-59N NANO V5_EN assemblé. fm Page 2 Mercredi, 20. RECEIVER SETTINGS 5-4-1TV Several choices are available. [. . . ] Range: 47-862 MHz Rear Panel 1 x IEC female (signal input) 1 x IEC male (RF Loopthrough) 1 x TV SCART 1 x AUX SCART (ITD 61/62/63/64/ 71/72/73/74/75 only) 1 x RCA (digital AC3 output) Audio Decoder CD ISO/IEC 13818-3 compliant MPEG layer I et II (Musicam Audio) Mode: Mono, Stereo, Joint stereo Sampling frequency: 32/44. 1/48 KHz Physical Specifications ITD 58N/59N/60N/68N: Size (wxdxh): 150x135x40 mm Total weight: ~300 g Operating temp. +5°C to +40°C Total packing (carton box) Total weight: ~1. 0 kg Size (wxdxh) : 200x160x108 mm Storage temp. -25°C to +65°C ITD 61/62/63/64/65/71/72/73/74/75 Size (wxdxh): 220x135x35 mm Total weight: ~400 g Operating temp. +5°C to +40°C Total packing (carton box) Total weight: ~1. 0 kg Size (wxdxh) : 247x236x80 mm Storage temp. [. . . ]