User manual SAGEM SG-DSK3

[. . . ] DATA SECURITY KIT SG-DSK3 This manual contains very important information. Please keep the manual in a safe place where it will not be lost. SG-DSK3 APPLICATION NUMBER MACHINE SERIAL NUMBER PRODUCT KEY Warranty While every effort has been made to make this document as accurate and helpful as possible, SAGEM Communication makes no warranty of any kind with regard to its content. All information included herein is subject to change without notice. SAGEM is not responsible for any loss or damages, direct or indirect, arising from or related to the use of this operation manual. [. . . ] (Operation during clearing is the same as "Clear All Memory" (page 11 of this manual). However, it is not possible to cancel during clearing. ) 14 System settings Power Up Auto Clear This function is used to automatically clear all data in the machine when the power switch is turned on. System Settings Power Up Auto Clear Select the data to be cleared at power up. Cancel OK All Memory File Data(Including protected/confidential files) Quick File Data(Including protected files) Job Status Jobs Completed List The following types of data can be cleared. All Memory File Data(Including protected/confidential files) Quick File Data(Including protected files) Job Status Jobs Completed List Select the checkboxes of the data to be automatically cleared when the power switch is switched on. When you have finished selecting the checkboxes, touch the [OK] key. No checkboxes are initially selected. When there is a stored image send job (fax, network scanning, or Internet fax job)*, "Power Up Auto Clear" will not take place when the power is turned on. * This includes received faxes and Internet faxes that have not yet been printed; however, it does not include data in a fax memory box (except confidential memory box). See the explanations in "Clear screen 2" and "If you wish to cancel data clearing. . . " in "Clear All Memory" on page 12 of this manual. 15 System settings Clearance Time Settings To further strengthen the security settings, you can have data clearing repeated a set number of times in each area. Touch the select box of each item and select the number of times that you wish data clearing to be repeated. When finished, touch the [OK] key. System Settings Clearance Time Settings Number of Times Data Clear is Repeated: Number of Times Power Up Auto Clear Program is Repeated: Number of Times Auto Clear at Job End Program is Repeated: Cancel OK 1 1 1 Time(s) Time(s) Time(s) Number of Times Data Clear is Repeated The number of times data clearing is repeated when "Clear All Memory", "Clear Document Filing Data", "Clear All Data in Jobs Completed List", or "Clear Address Book and Registered Data" is executed can be set to any number from 1 to 7. of Times Power Up Auto Clear Program is Repeated The number of times "Power Up Auto Clear" is repeated can be set to any number from 1 to 7. This setting is only enabled when the [Power Up Auto Clear] checkbox is selected. Number Number of Times Auto Clear at Job End Program is Repeated The number of times auto clear is repeated after each job is completed can be set to any number from 1 to 7. The factory setting is 1. About the repeat setting When the repeat setting (number of repetitions) is increased to enhance the security function, the time required for data clearing increases. It is recommended that you select repeat settings for "Number of Times Data Clear is Repeated", "Number of Times Power Up Auto Clear Program is Repeated", and "Number of Times Auto Clear at Job End Program is Repeated" that are suitable for your security needs and conditions of use. 16 System settings Enable/Disable Settings Disabling of Document Filing This program is used to restrict the filing modes of the document filing function. Document filing modes (Quick File Mode, Sharing Mode, and Confidential Mode) can be separately disabled in each mode in which document filing operates (Copy, Printer, Scan to HDD, and Image Send mode). System Settings Enable/Disable Settings Disabling of Document Filing: Quick File Mode Copy Printer Scan to HDD Image Send Disabling of List Print: All Custom Setting List Sending Address List Sharing Mode Confidential Mode Cancel OK Touch the checkboxes of filing modes that you wish to disable. When you have finished selecting the checkboxes, touch the [OK] key. The property of a file that is already stored cannot be changed using "Property Change" ( Operation Guide "CHANGING THE PROPERTY" in "6. DOCUMENT FILING") to a disabled filing mode. If a certain property is disabled in "Disabling of Document Filing" and a file exists that was previously stored with this property, the property of the stored file can be changed to another property. When printing with the printer function, even formats for storing files that have been disabled with this program will appear in the Job Handling screen of the printer driver ( Operation Guide "SAVING AND USING PRINT FILES (Retention/Document Filing)" in "3. However, if a disabled file format is selected when printing a file, the file will not be stored (only printing will take place). Disabling of List Print This program is used to disable printing of any of the following lists that are printed using "List Print (User)" in the system settings (general). "All Custom Setting List", "Sending Address List", "Document Filing Folder List" Select the checkboxes of the lists for which you wish to disable printing. After selecting the desired checkboxes, touch the [OK] key. 17 System settings Disabling of Print Jobs Other Than Print Hold Job Printing in print mode other than from the operation panel of the machine can be prohibited. [. . . ] The pattern is printed once for one scan of a photo. The pattern is printed on each page of the multi-page enlargement. The pattern is printed in the normal orientation without being inverted. The printed area of the pattern is enlarged to match the A3 Full Bleed setting. [. . . ]