User manual SAGEM MY100X

[. . . ] ENGLISH You have just bought a mobile phone and we congratulate you on your choice. Your phone will allow you to use different international networks (GSM 900 MHz and DCS 1800 MHz) depending on the roaming agreements between the operators. We would like to remind you that this phone is approved to European standards. To get the most out of using your phone, we recommend that you read this manual carefully and keep it handy for future reference if needed. [. . . ] You can thus make a call, in a comfortable and discreet way for you caller. To be discreet, clear the selection from the box. Validate by pressing OK. Hands-free mode The "Hands-free" mode enables you to follow a conversation with several people and be free to move, for example, to take notes during your conversation. To change to hands-free mode during a call, make a short press on key then press [Yes] to confirm activation of the amplified the mode. WARNING: in this mode do not bring the phone up to your ear. 44 Ringing and beeps Controls Customizing your phone Installing the energy saving mode The frequency of display of the screen saver has a direct impact on the phone's operating capacity. For optimal operating capacity, set the maximum interval. In order not to use the phone's screen light and thereby increase its operating time: In the Customization/Energy saving menu, check No light and press OK to validate. Configuring the idle mode You can choose between an animated idle screen or the economy mode. In the Customization/Screen Saver menu, use the scrolling arrows to select the animation you want, a text, a banner or the economy mode. Press the key to access the setting of the animation or economy mode activation interval. To exit the animation or economy mode, press the key. If you have saved animated screen savers received by message (see Text messages chapter), they will appear in that menu. The following options are available according to the type of screen: - validate the animated screen savers as default screen - change its title (only downloaded screens) - consult its memory capacity - consult the available memory - consult the available memory - delete the selected screen - delete all screens. Controls 45 Personalising the welcome screen You can personalise the welcome screen of your phone by typing a text. Validate by pressing OK. Customizing the programmable keys The action allocated to a programmable key is triggered by a long press or two short presses only from the standby screen. This menu, accessible directly by a short press on a programmable key from the standby screen, enables you to configure the and keys. There are different possibilities for each of the keys. Once the keys programmed, you have directly access to the menu indicated. Selecting the display language You can select the language in which you wish your phone display to operate: Select Automatic. The display language will be that of your SIM card (if available). Otherwise select the language of your choice using the scrolling arrows and validate by pressing OK. Select the type of response You can reply to a phone call: - either automatically, if you have ticked the Auto. answer box (for a hands free kit) and validated by pressing OK - or by pressing any numeric key if you have ticked the Any key and validated by pressing OK. 46 Controls Selecting the network Network When your home network is not accessible (abroad, for example), your phone automatically searches for another available and authorised network in the order of preference indicated by the list on the SIM card. Every SIM subscription card can store an ordered list of preferred networks. If the list has not been programmed, or if none of the networks on the list are available or authorised, the phone searches for an authorised network providing the highest level of signal. [. . . ] After 5 or 10 times (depending on SIM card type), the SIM card will be permanently locked. Contact your Operator or your Service Provider to obtain a new card. The same procedure (entering 052) applies when the PIN-2 code is blocked (PUK2 code). 75 Error message: SIM NOT PRESENT Error message: INCORRECT PIN Error message: SIM BLOCKED Troubleshooting PROBLEM - SITUATION Error message: SIM LOCKED ACTIONS The mobile phone operator may require certain types of SIM card to be used. [. . . ]