User manual SAGEM MY419X

[. . . ] ENGLISH You have just purchased a SAGEM phone, we congratulate you; it is recommended that you read this handbook carefully in order to use your phone efficiently and in the best conditions. Your phone can be used internationally in the various networks (GSM 900 MHz and DCS 1800 MHz or PCS 1900 MHz) depending on the roaming arrangements with your operator. This phone is approved to meet European standards. SAGEM is a trademark of Sagem Communication SAFRAN Group. T9® Text Input is a trademark of ©Tegic Communications Inc. [. . . ] It cannot be detected by other Bluetooth® devices. In this mode, a device can only connect to your phone using Bluetooth® if you have already paired it. This mode lets you detect other devices and pair with them from your phone. - On & visible: your phone is visible for a period of 3 minutes. During this period, it can be detected by the other Bluetooth® devices. Select this mode when a pairing with your phone has been initiated from another Bluetooth® device. - Off: the Bluetooth® function is not available. - On & always: your phone is visible and can be detected by the other Bluetooth® devices as long as this mode is selected. IMPORTANT: - The Off option ensures the best battery life for your phone. - Bluetooth® security is better guarded because your phone remains invisible to the other devices. My Bluetooth name This is the name used to identify your phone when it is detected by another Bluetooth® device. Pairing procedure Select Paired devices/New Device. If the Bluetooth® function is not active, the phone prompts you to activate it using one of the 3 modes described above. The phone searches for visible Bluetooth® devices and displays the list. Select the device concerned and validate your choice. Your phone then prompts you to enter a code which must be the same as the code entered on the remote device. Enter and validate this code: Your phone is now paired with the remote device. A connected device is shown in blue in the list. [Options] on the name of a device lets you access the following options: - Delete: this is used to delete the device. WARNING: using this function needs starting the pairing over again. - Rename: this is used to modify the name of the device. - Delete all: this is used to delete all your devices. [. . . ] Check and deactivate the outgoing calls restriction when necessary. If the problem persists, please contact your Technical Helpdesk. No receiving calls Try to make a call in order to check that the phone and the network are operational. Check and deactivate the permanent call forwarding (permanent call forwarding icon displayed on the screen). [. . . ]