User manual SAGEM MY850C

[. . . ] ENGLISH You have just purchased a SAGEM phone, we congratulate you; it is recommended that you read this handbook carefully in order to use your phone efficiently and in the best conditions. Your phone can be used internationally in the various networks (3G, GSM 900 MHz and DCS 1800 MHz) depending on the roaming arrangements with your operator. This phone is approved to meet European standards. WARNING Depending on the model, network configuration and associated subscription cards, certain functions may not be available. SAGEM is a trademark of Sagem Communication SAFRAN group. [. . . ] You do not need to select a device from this list at this time, you can start a one-off search for a device when you initiate sending. My Bluetooth name This is the name used to identify your phone when it is detected by another Bluetooth® device. Connection functions 33 Mode With this menu you can, on the one hand, activate and deactivate the Bluetooth® function and, on the other, when the Bluetooth® function is activated, select whether you want other Bluetooth® devices to be able to detect your device. · Off: the Bluetooth® function is not available. · On and hidden: your phone is not visible. It cannot be detected by other Bluetooth® devices. In this mode, a device can only connect to your phone using Bluetooth® if you have already paired it. This mode lets you detect other devices and pair with them from your phone. · On and visible for 3 minutes: your phone is visible for a period of 3 minutes. During this period, it can be detected by the other Bluetooth® devices. Select this mode when a pairing with your phone has been initiated from another Bluetooth® device. · On and visible: your phone is visible and can be detected by the other Bluetooth® devices as long as this mode is selected. IMPORTANT: - The Off option ensures the best battery life for your phone. - Bluetooth® security is better guarded because your phone remains invisible to the other devices. Pairing procedure Select My devices/New device. If the Bluetooth® function is not active, the phone prompts you to activate it using one of the 3 modes described above. The phone searches for visible Bluetooth® devices and displays the list. Select the device concerned and validate your choice. Your phone then prompts you to enter a code which must be the same as the code entered on the remote device. Enter and validate this code: Your phone is now paired with the remote device. A connected device is shown in blue in the list. [Options] on the name of a device lets you access the following options: - Delete: this is used to delete the device. WARNING: using this function needs starting the pairing over again. [. . . ] - Enter your PIN number again and validate. After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is definitely locked. You must then contact your operator to obtain a new card. SIM LOCKED In certain cases, the handset can only be used with some types of SIM cards. [. . . ]