User manual SAGEM MYC-4

[. . . ] ENGLISH You have just purchased a SAGEM phone, we congratulate you; it is recommended that you read this handbook carefully in order to use your phone efficiently and in the best conditions. Your phone can be used internationally in the various networks (GSM 900 MHz and DCS 1800 MHz) depending on the roaming arrangements with your operator. We remind you that this phone is approved to meet European standards. WARNING Depending on the model, network configuration and associated subscription cards, certain functions may not be available. [. . . ] On the Security menu, please select the Keypad locking menu and [Select]. Select Activate or deactivate and validate. The lock icon appears on the initial screen. This function is also available in the initial screen pressing the and keys. PIN number This menu allows you to activate and modify your phone's PIN. On the Security menu, please select the PIN number menu and [Select]. To modify the PIN, select Modify and [Select]. To activate or deactivate the PIN, select the Check PIN menu and [Select]. Select Activate or Deactivate and validate. 58 Settings PIN2 number You have a second PIN number to allow you to access certain functions*. * These functions may or may not be available depending on your SIM card. Proceed as above in order to activate, deactivate or modify PIN number 2 of your phone. Phone code The Phone code menu allows you to activate the phone code so that it is requested and checked whenever the phone is switched on if a different SIM card is used. This code is automatically linked to the SIM card installed when the phone is activated, for example to protect the phone if stolen. To activate or deactivate the phone code, select the Phone code menu and validate. Enter 0000 (the factory code, by default) and validate. Select Activate or Deactivate and validate. To modify the phone code, select Modify and validate. Enter phone code again to confirm it and validate. 59 Settings Confidentiality The Confidentiality function is used to delete numbers stored in View last calls and the SMS stored in the memory when a new SIM card is inserted into the phone. This menu allows the activation of automatic deletion, after power off/on, for messages and/or calls stored in the phone. On the Security menu, please select the Confidentiality menu and [Select]. Select Activate or Deactivate and validate. Operator This menu allows you to modify the call barring. On the Security menu, please select the Operator menu and [Select]. Access to this service depends on your type of subscription. 60 Settings Call barring Call barring can be applied to ALL calls (incoming and outgoing), to all incoming calls when you are away from your home country (if roaming available). This menu allows you to block the sending or reception of certain calls. [. . . ] Operator name does not appear on Go into the Settings menu, select Networks, then Selection. Wait until the screen operator appears, select it and validate. If the Operator logo is present (depending on model), activate the display (Settings/Display/Operator logo). Hold the key down unless ring tone sounds, when a short touch is enough. [. . . ]