User manual SAGEM MYH-10

[. . . ] ENGLISH SERIES Your phone operates on a GSM network (GSM 900 MHz and DCS 1800 MHz). We would like to remind you that this phone is approved to European standards. To get the most out of using your phone, we recommend that you read this manual carefully and keep it handy for future reference if needed. WARNING Make sure your SIM card is compatible with your phone. [. . . ] During a call, a special tone can inform you that another caller is trying to reach you. The caller's number - and name, if stored - is displayed on the screen. Configuring automatic redial You can activate automatic redial either by default or on demand. 34 Call services Blacklist The blacklist is used to limit failures on automatic calls (calls generated by the automatic redial function or by applications). When several automatic calls failed with a number (number busy or unknown), this number is put in the blacklist and no automatic call will be done with this number any more until you delete it from the blacklist. Note: this function does not apply to the calls performed manually. Voice mail number To program a special permanent call number, type in this number and validate. Local information distribution (Service depending on the operator) This menu allows you to activate and select reception of information distributed by the network. Placing calls on hold (Service depending on the operator) During a call, you can put the current call on hold by pressing OK. Warning: In this case, pressing ends all calls. Call services 35 Ringing and beeps Selecting the volume and the type of ringing tone There are numerous tunes available (including a "silent ringing tone") and several volume levels including a crescendo. You can set your phone to ring on receiving calls and/or messages. You can, during adjustment, listen to the melody selected or not: activate or deactivate by pressing the key; the symbol appears barred or not. Select the ringing tone required using the scrolling arrows. Press the key to move on to the next section. Select the volume required for using the phone with the scrolling arrows (from 1 to 4 and + for the volume crescendo) and validate using OK. Press the key to move on to the next section. Select the volume required for using the hands free car or pedestrian kit with the scrolling arrows (from 1 to 4 and + for the volume crescendo) and validate using OK. Call groups See chapter Directory for all the functions about call groups. Selecting silent mode You can also activate/deactivate the silent mode by holding down the This mode is indicated by the symbol on the screen. key. Personalised ringing tone With this menu, you can create or modify a tune. 36 Ringing and beeps Setting the beeps This menu allows you to activate a beep for the battery, the keypad or the network. Setting the keypad tones Select the tone required using the scrolling arrows and validate (press the key). Setting the network tone If you want your phone to give a warning beep when it locates a network on which it can communicate: tick the box and validate by pressing OK. Setting the low battery tone If you want your phone to give a warning beep when your battery is low: tick the box and validate by pressing OK. Hands-free mode To change to hands-free mode during a call, make a short press on the amplified mode. WARNING: in this mode do not bring the phone up to your ear. key then press [Yes] to confirm activation of the Ringing and beeps 37 Controls Customizing your phone Installing the energy saving mode The frequency of display of the screen saver has a direct impact on the phone's operating capacity. For optimal operating capacity, set the maximum interval. In order not to use the phone's screen light and thereby increase its operating time: In the Customization/Energy saving menu, check No light and press OK to validate. Configuring the idle mode You can choose between an animated idle screen or the economy mode. In the Customization/Screen Saver menu, use the scrolling arrows to select the animation you want, a text, a banner or the economy mode. Press the key to access the setting of the animation or economy mode activation interval. [. . . ] After 5 or 10 times (depending on SIM card type), the SIM card will be permanently locked. Contact your Operator or your Service Provider to obtain a new card. The same procedure (entering 052) applies when the PIN-2 code is blocked (PUK2 code). The mobile phone operator may require certain types of SIM card to be used. [. . . ]