User manual SAGEM MYMOVIEBOX

[. . . ] 252963905_myMovieBox_en. book Page 1 Mardi, 27. novembre 2007 1:54 13 ENGLISH 252963905_myMovieBox_en. book Page 2 Mardi, 27. novembre 2007 1:54 13 252963905_myMovieBox_en. book Page 3 Mardi, 27. novembre 2007 1:54 13 Thank you for using this SAGEM phone. [. . . ] [Options] on the name of a device lets you access the following options: - Delete: this is used to delete the device. WARNING: using this function needs starting the pairing over again. - Rename: this is used to modify the name of the device. - Delete all: this is used to delete all your devices. WARNING: using this function needs starting the pairing over again. - Activate: this is used to activate the connection with the device. - Deactivate: this is used to deactivate the connection with the device. - Properties: this is used to display the list of the device's Bluetooth® services. Notes: - Refer to the user manual of the device with which you are pairing to find out how to set this device to the mode allowing this operation. - The code of the remote device may be predefined by the device manufacturer. In this case, refer to the user manual of this device to find out this code. Car kit/Headset This menu allows you to activate or deactivate the Automatic response option when the phone is connected to a pedestrian kit or a car kit. SyncML Two selections: - Network (OTA): you can synchronize your phonebook, your organizer or your ToDos with your archives stored in your operator's network depending on the options offered by your operator. - Local: you can synchronize your phonebook, your organizer or your ToDos with your archives stored in your computer. Use the Wellphone software and configure your USB connection in your phone or activate Bluetooth®. Connectivity 35 252963905_myMovieBox_en. book Page 36 Mardi, 27. novembre 2007 1:54 13 USB mode Data exchange between the phone and a PC with a USB cable connection 1) Data exchange between a memory card inserted in the phone and a PC First you must select the USB key mode (see hereafter). After connection of the USB cable between the phone and the PC, the memory card is considered as an additional memory in the Windows explorer files directory; you can copy/paste. 2) Data exchange between the phone memory and a PC First you must select the Modem mode (see hereafter). After connection of the USB cable between the phone and the PC, you must use the MPAS software (My Pictures And Sounds available on www. planetsagem. com) or the Wellphone software (available on www. wellphone. com). Note: If a call comes in during an exchange of data with your PC, the link will be interrupted and will have to be manually re-started. This menu allows you to select a mode to connect the phone to a peripheral with the USB cable available as an accessory. - At plugging-in: if you select this option, when connecting a USB cable, the phone asks you to select the mode you want. - Modem: to exchange data between the phone memory and a PC. - Printer Pictbridge: to connect the phone to a printer (printing photos) without using a PC. [. . . ] If the problem persists, please contact your Technical Helpdesk. No receiving calls Try to make a call in order to check that the phone and the network are operational. Check and deactivate the permanent call forwarding (permanent call forwarding icon displayed on the screen). Check and deactivate the incoming calls restriction when necessary. [. . . ]