User manual SAGEM PHOTO EASY 255

[. . . ] Insert a memory card Transferring photos from a photo GSM Using a camera in DPOF mode Print starting from a bluetooth peripheral (optional) Connect a PC (Personal Computer) Print from a camera (PictBrigde mode) Print Create your shopping basket Zoom Formats Set the photo quality Your preferences You have just acquired a SAGEM PHOTO EASY 255 printer, and we thank you for choosing our product. With this high quality printer you can get the most out of your digital photos. In a few simple steps you can produce photo prints identical to those from a professional developer, for your personal use or to share with friends and family. The easy-to-follow steps in this user guide will walk you through: · Printing photographs transferred from a GSM mobile phone, from a camera in DPOF or Pictbridge mode, or an optional Bluetooth peripheral. [. . . ] Refer to this manual for further information. Make sure that both the PC and the printer are switched on. Never apply force when plugging in connectors into the equipment as this could damage both the cable and the connector. Recognition between the two devices is automatic Your printer PHOTO EASY 255 SAGEM supports the standard PictBrigde, it thus allows the impression of photographs starting from cameras compatible with this standard. Read the documentation of the camera to check compatibility with the PictBrigde standard and to check the connection with the printer. Once the analysis and recognition phase is complete, a screen is displayed indicating PictBridge mode. When the photo is transferred, printing starts automatically and the green lamp flashes. In PictBridge mode, your SAGEM PHOTO EASY-255 printer supports the following functions: Printing a photo. Selecting photos and printing them several times on the same paper. Monitoring printing and especially the beginning, progress and end of the printing process. Also, error messages likely to occur (no paper, paper jam, end of ribbon, system error). Your SAGEM PHOTO EASY-255 printer does not support the following functions: Image cropping. Your SAGEM PHOTO EASY 255 printer is designed to be used with or without a computer. This chapter describes printer operation without a computer. Refer to the technical data table at the end of thi user manual to check whether your memory card is compatible with the printer. in the event of incompatibility , use a computer and the image processing software supplied on the CD-ROM. Warning - Small sized images, less than 76, 800 pixels, cannot be printed from memory cards. On the other hand, these photographs may be printed from a PC or by means of a wireless IR link (or Bluetooth optional equipment). Make your selection using the browser's Check that you have enough paper in the dawer. Select the photo you want using the browser's or keys. Use the browser's keys to move to the part of the photo to be enlarged. Press the key for each copy you want; the number of copies is displayed in the top right hand corner of the photo. [. . . ] The selected number of photos is greater than the remaining ribbon capacity to print all photos. Card unreadable (03) Consumable not compliant (01) Consumable not compliant (02) Consumable not compliant (03) Consumable not compliant (04) Consumable not compliant (05) Remove card Unrecoverable error, abort the operation and try again Unrecoverable error, abort the operation and try again Unrecoverable error, abort the operation and try again Unrecoverable error, abort the operation and try again Please contact your dealer Error during transfer of photographs from GSM mobile phone camera. Check that both devices are facing each other. Switch off printer, wait 30 seconds and restart. [. . . ]