User manual SAGEM PHOTO EASY 270

[. . . ] Connect it to a mains outlet in compliance with the installation instructions in this booklet and the indications stated on the identification label located on the unit (voltage, current and frequency of the electricity network). As a precaution, in case of danger, the mains adapters act as a disconnecting mechanism for the 230V power supply. They should be placed near the device and should be easily accessible. Never open the top cover when the printer is operating, as you risk breaking the film that may result a printer malfunction. [. . . ] The memory cards do not go completely inside the read slot. Remove the card and check that you are inserting it the right way round into the correct slot. For further information, refer to the user booklet on the CD-ROM provided with your printer. Insert your memory card; after reading the card, the last photograph will be displayed on the LCD screen. Press the and key to display the first photograph on the card. Scroll through the photographs with the keys. After selecting the photograph, press the key and follow the instructions Crystal Image makes all the necessary settings and corrections related to picture sharpness, colour management and contrast automatically to obtain the best print quality possible. Furthermore, exposure defects will be corrected (for example, under-exposed photos will be made lighter or the portions of photo with strong contrasts will be compensated for). When printing from a personal computer, the "Crystal Image" and "Red Eye" correction functions are not proposed. The following table shows the number of times that the components of the "Crystal Image" function. Number of presses on the key New effects (special effects, sepia, B&W, negative, black & white and colour embossing, solarisation, black & white and colour contour, charcoal). Use of these functions is detailed in the user booklet on the CD-ROM provided with your printer. GUARANTEE (UK Terms and Conditions) In order to apply the guarantee, you should contact your dealer. Should malfunctioning arise, the dealer will advise you what to do. If you bought your equipment from SAGEM directly, the following shall apply : A) SAGEM undertakes to remedy by repair, free of charge for labour and replacement parts, any defects in the equipment during a period of twelve (12) months from the date of original delivery of the Equipment, where those defects are a result of faulty workmanship. During this twelve month guarantee period, the defective equipment will be repaired free of charge; the customer must however return the defective equipment at his/her own expense, to the address given by SAGEM After Sales Department, the phone number of which can be found on the delivery slip. Unless the customer has concluded with SAGEM a maintenance contract in respect of the equipment which specifically provides for repairs to be carried out at the customer's premises, the repairs will not be carried out on the equipment at the customer's premises. The following sentence applies to purchases of equipment for the customer's trade, business or profession. Except as otherwise expressly provided in this Document and to the extent permitted by law, SAGEM makes no representations or warranties, express or implied, statutory or otherwise, and to such extent, all terms and conditions implied by law are hereby excluded. This guarantee does not affect the Customer's statutory rights. [. . . ] Impre g paper toute puttin ins before tion avant apiere sheet Fotop de protec ve this Sie die feuille Remo bevor cette zblatt papel. Impre g paper toute puttin ins before tion avant apiere sheet Fotop de protec ve this Sie die feuille Remo bevor cette zblatt papel. Impre g paper toute puttin ins before tion avant apiere sheet Fotop de protec ve this Sie die feuille Remo bevor cette zblatt papel. Impre g paper toute puttin ins before tion avant apiere sheet Fotop de protec ve this Sie die feuille Remo bevor cette zblatt papel. [. . . ]