User manual SAM4S ER-265 REV 3.05

[. . . ] ER-260/265 Electronic Cash Register AU Operator's and Programming Manual All specifications are subject to change without notice. 3. 05 (Sep10) From ER260/265 v01. 000 Up to ER260/265 v01. 014A ATTENTION The product that you have purchased contains a rechargeable Ni-MH battery. At the end of its useful life, under various state and local laws, it may be illegal to dispose of the battery into the municipal waste system. Check with your local solid waste officials for details concerning recycling options or proper disposal. WARNING This is a Class A product. [. . . ] For example, if you wish to record a charge account number, enter the number and press the #/NS key before totaling the sale with the CHARGE key. For example enter: 1 2 3 4 ____THANK_YOU ___CALL_AGAIN DEPT. 1____________T1 $2. 99 NON ADD NO. 1234 ROUND $0. 01 GST AMOUNT $0. 27 CHARGE $3. 00 16:52 03-01-2006 000028 00 3. The display will indicate "=" for total, the drawer will open and the receipt will print as in the example on the right. ER-260/265 Electronic Cash Register AU Operating Instructions · 33 Received On Account Operations You can use the Received on Account key to accept cash into the cash drawer when you are not actually selling merchandise. For example, use the Received on Account key to accept payments for previously sold merchandise or record loans to the cash drawer. Enter the amount of cash you are receiving. For example, enter: 2 0 0 0 ____THANK_YOU ___CALL_AGAIN RECEIVED ON 16:52 000029 $20. 00 03-01-2006 00 2. The drawer will open and the receipt will print as in the example on the right. Paid Out Operations You can use the PAID OUT key to track cash paid out for merchandise or to record loans from the cash drawer. Enter the amount of cash you are paying. For example, enter: 2 0 0 0 ____THANK_YOU ___CALL_AGAIN PAID OUT 16:52 000030 $20. 00 03-01-2006 00 2. The drawer will open and the receipt will print as in the example on the right. 34 · Operating Instructions ER-260/265 Electronic Cash Register AU Totaling a Cash Sale 1. To display and print the subtotal of the sale including tax, press SUBTOTAL: SUB TOTAL _______THANK_YOU ___CALL_AGAIN DEPT. 1____________T1 $2. 99 DEPT. 1____________T1 $2. 99 4X @1. 99 DEPT. 2____________T1 $7. 96 SUBTOTAL $13. 94 ROUND $0. 01 GST AMOUNT $1. 27 CASH $13. 95 16:51 03-01-2006 000031 00 3. To total a cash sale, press CASH/TEND: CASH/ TEND 4. The display will indicate "=" for total, the drawer will open and the receipt will print as in the example on the right. Tendering a Cash Sale 1. To display and print the subtotal of the sale including tax, press SUBTOTAL: SUB TOTAL _______THANK_YOU ___CALL_AGAIN DEPT. 1____________T1 $2. 99 DEPT. 1____________T1 $2. 99 4X @1. 99 DEPT. 2____________T1 $7. 96 SUBTOTAL $13. 94 ROUND $0. 01 GST AMOUNT $1. 27 TOTAL $13. 95 CASH $20. 00 CHANGE $6. 05 16:52 03-01-2006 000032 00 3. Enter the amount tendered by the customer. For example, for $20. 00 enter: 2 0 0 0 4. The display will indicate "C" for change, the drawer will open and the receipt will print as in the example on the right. ER-260/265 Electronic Cash Register AU Operating Instructions · 35 Tendering a Check Sale 1. To display and print the subtotal of the sale including tax, press SUBTOTAL: SUB TOTAL _______THANK_YOU ___CALL_AGAIN DEPT. 1____________T1 $2. 99 DEPT. 1____________T1 $2. 99 4X @1. 99 DEPT. 2____________T1 $7. 96 SUBTOTAL $13. 94 GST AMOUNT $1. 27 TOTAL $13. 94 CHECK $20. 00 CHANGE $6. 06 16:52 03-01-2006 000033 00 3. Enter the amount of the check tendered by the customer. For example, for $20. 00 enter: 2 0 0 0 4. The display will indicate "C" for change, the drawer will open and the receipt will print as in the example on the right. Totaling a Charge Sale 1. [. . . ] Turn the control lock to the PGM position. Enter up to 18 characters for a PLU, For EPROM v1. 013A and after, refer to NEW Alpha Overlay, enter the character you wish, or For EPROM v1. 010 and before, refer to OLD Alpha Overlay, enter the character you wish, each character follow up with decimal point `·', or Refer to the Code Table, enter the two digits that represent each character you wish. Enter the PLU number, press the PLU key. Repeat from step 2 to 5 for next PLU you want to program. [. . . ]