User manual SAMMY DEER HUNTING USA CONVERSION KIT

[. . . ] Take off the old parts (Joystick or Gun unit assy) and the old push button assys from the control panel. Then put on the DEER HUNTING USA Control Panel Overlay. NOTE: After you put on the DEER HUNTING USA Control Panel Overlay, you must make the holes for the DEER HUNTING USA Gun Assy, Gun Holster and Push Button Assy. Or if you want, install Gun Assy or Gun Holster on the side of cabinet. Hole for Push Button Holes for Gun Assy Control Panel MOUNTING DIMENSIONS FOR GUN ASSY MOUNTING GUN HOLSTER You can mount GUN HOLSTER to the top of the control panel or side of cabinet. [. . . ] See page 10 "BACKUP CLEAR" this procedure for de tails on. * Press START button to exit from GUN TEST function. GUN TEST 15 15 15 516 EA51 6640 0101 A514 664 000 6FRF 645 15 115 4CAD 646 15 PRESS START BUTTON TO EXIT 8 2. COLOR TEST Use this screen to check the color of monitor. The color blocks in the center should be four bands (Red, Green, Blue and White from top to bottom), each with a color scale from dark to bright, left to right. If the screen does not match this description, adjust the Monitor as described in the Monitor's manual. * Press the START button to exit and go back to the TEST MENU screen. COLOR TEST RED GREEN BLUE WHITE PRESS START BUTTON TO EXIT 3. CROSS HATCH Use this screen to check the size of picture. The CROSS HATCH test pattern has a White grid on a Black background. Check following: - The grid line should be straight, and the lines should not have excessive pincushion or barrel distortion. - "Out"line of grid line is the same size as "Out"line of game screen. So, "Out" line should be able to be seen with no overflow of grid lines on screen. If these are not as above, adjust the Monitor as described in the Monitor's manual. * You can exit and go back to the TEST MENU screen by press START button. CROSS HATCH PRESS START BUTTON TO EXIT 4. I/O TEST Use this screen to check the switches in this game. To check the functioning of each switch, activate it and watch the corresponding OFF letters change to ON. If the ON and OFF letters do not appear correctly, check the Harness connections and Switches. * Press START button and Gun trigger simultaneously to exit. I/O TEST START PUMP TRIGGER SERVICE COIN A COIN B TEST : : : : : : : OFF OFF OFF OFF OFF OFF OFF PRESS START & GUN TRIGGER TO EXIT 5. SOUND TEST Use this screen to check all game sounds. You can check each sound in this game. SOUND TEST SOUND CODE 000 RIFLE 1 FORWARD : PLAY : START GUN * Press START button and Gun trigger simultaneously to exit. PRESS START & GUN TRIGGER TO EXIT 9 6. MEMORY TEST Use this screen to check RAM and ROM on the Main P. C. B. will automatically check them when you enter this screen. If there are no problems, the word OK will appear on screen. [. . . ] This limited warranty is invalid for any product that upon examination, is deemed to have been subject to misuse, improper repair or installation, neglect or violation of specification or other instructions published by Sammy USA Corporation. There are no additional warranties which extend beyond those limited warranties described above. The limited warranties described above shall be in lieu of any other warranty, express or implied, including but not limited to any implied warranty of merchantability or fitness for a particular purpose. Return Merchandise Authorization 1. Contact your authorized SUSA distributor to receive a Return Merchandise Authorization for return. [. . . ]