User manual SAMSON D412

[. . . ] When a cart is used, utilize caution when moving the cart/apparatus combination to avoid injury from tip-over. Servicing is required if the apparatus has been damaged in any way, such as power-supply cord or plug breakage, damage due to liquid or objects falling onto the apparatus, exposure to rain or moisture, or if the apparatus does not operate normally, or has been dropped. POWER ON/OFF SWITCH: For products with a power switch, the power switch DOES NOT break the connection from the mains. For rack-mount or installation where plug is not accessible, an all-pole mains switch with a contact separation of at least 3mm in each pole shall be incorporated into the electrical installation of the rack or building. [. . . ] The XP25i is a lightweight, compact, personal sound system ideal for use in a variety of mobile presentation, tour guide and school activity applications. The XP25i provides exceptionally clear sound; offering 25 watts of power to a 5-inch full-range loudspeaker. unique to the XP25i is an integrated iPod dock for playback of pre-recorded speech , alerts , or music. The XP25i also features an expanded mixer section with a microphone input, line input, line output, as well as independent volume controls for iPod, and microphone. the XP25i system includes a push-to-talk microphone with 3' cable , shoulder strap , battery charger and microphone stand adapter. In these pages, you'll find a detailed description of the features of the XP25i portable PA, as well as a guide to its control panel, instructions for setup and use, and full specifications. you'll also find a warranty card enclosed. Please don't forget to fill it out and mail it in so that you can receive online technical support, and so that we can send you updated information about this and other Samson products in the future. Also, be sure to check out our website (www. With proper care, your XP25i will operate trouble-free for many years. We recommend you record your serial number in the space provided below for future reference. Turn the knob counter-clockwise until it clicks to turn the system off. Power Indicator - RED LED illuminates indicating the unit is powered on, ready for operation. 5mm) auxiliary Line Input for connecting an external sound source (CD player, MP3 player, or audio line output from another device). Plug the supplied Samson PT40M or another high-impedance microphone into this input. Has a built-in iPod dock which can Charge Indicator - The Charge be used to connect most of the Indicator flashes GREEN while the latest iPod models. The iPod signal rechargeable battery is charging, is controlled by the iPod Level and will light steady GREEN when control (#4). Microphone Stand Adaptor Charge Indicator will flash RED - 5/8" female thread adaptor when the battery is low and the for mounting the XP25i onto a unit is power on. The Microphone, iPod and Line In signals are present at this output. Carry Handle - Ergonomically designed Carry Handle allows for easy transport. If you ever need to replace the battery, open the compartment cover, and remove the battery protection plate. Gently slide the old battery from the compartment and disconnect the RED and BLACK battery leads. [. . . ] We, Samson Technologies Corporation, located at 45 Gilpin Ave, Hauppauge, NY 11788 USA declare under our own responsibility that the Products: Equipment: Portable PA System Model: XP25i are in conformity with the essential requirements of the following EC Directive(s) when installed in accordance with the installation instructions contained in the product documentation: 2006/95/EC 2004/108/EC LVD Directive EMC Directive Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement. Sound and television broadcast receivers and associated equipment -- Immunity characteristics -- Limits and methods of measurement. electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase). Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public lowvoltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection. [. . . ]